Best Auto Body Shop in New Jersey

If you’re looking for an auto body shop in New Jersey make sure you give Peotters Tire & Auto a call as the New Jersey areas premier tire and brake shop. Today’s vehicles are made with many different types of fuel-saving materials like lightweight alloys and plastics. It is important for an auto body shop in New Jersey to be aware of the different materials and techniques used for repairing them.

Auto body shops like Peotter’s Tire and Auto and collision repair services refer to manuals for instructions repairing bumpers. The different material types require various finish materials, removal and installation procedures.

Bumper Repairs

When a plastic bumper is cracked or has a small hole it can be repaired to look as good as new. Replacing the bumper is wasteful and it creates unnecessary debris for our landfills.

A good, eco-friendly auto body shop in New Jersey will only recommend replacing the bumper if the damage is severe enough that repair time would be considered unreasonable and quality of results would be unsatisfactory.

The nation's top mechanics are rejecting the recommendation by some in the auto field that cars can go 5,000 miles or more before oil is changed. National Institute for Auto-motive Service Excellence (ASE)-certified Master Automobile technicians weighed in on this and other issues in a survey conducted by Valvoline. The survey covered the controversial recommendation and trend toward longer intervals between oil changes, as well as the costs to car owners of delayed maintenance. "Certified Master Automobile Technicians are the best of the best," said ASE President Ron Weiner. "They are on the front lines of taking care of today's vehicles and they have definite thoughts on how motorists can participate in making their cars and trucks run better and last longer." Oil Change Frequency Mechanics view oil as the lifeblood of the car engine, with 84 percent saying not getting a regular oil change can cause the most problems for a vehicle, when compared to other maintenance issues. Sixty percent said the oil should be changed at 3,000 miles-the longtime, recommended standard. According to the survey, Valvoline remains the number one choice of ASE Master Automobile Technicians for use in their own cars and trucks, and is the brand of motor oil most recommended by them to customers, friends and relatives. "Changing oil with quality motor oil, like Valvoline, at regular intervals is the best way to prevent damage to your car's engine and keep more money in your pocket," said Valvoline Marketing Director Bryan Emrich. He added that regular oil changes protect the engine and reduce sludge, which can impact engine perfor-mance and cause costly repairs. Delayed Car Maintenance While car owners know, intellectually and intuitively, that regular maintenance is important to keeping their four-wheeled investment in safe condition and working order, the reality is that more and more Americans are not listening to conventional and proven wisdom. The vast majority of mechanics-87 percent-said they believe American car owners are putting off routine maintenance, mostly for cost reasons. Ironically, they overwhelmingly said-at 97 percent-that delayed care will cost an owner much more in the long run, as problems left unattended can multiply and lead to other issues.

The cost of repairing small abrasions, cracks and holes in plastic bumpers is often much cheaper than replacing the part.

Used Tires Wholesale

Of course, many collision repair technicians would rather replace the part and charge a fee for their labor plus mark-up on the price of the part because they lack in cosmetic repair skills and it is easier to warranty the work.

Working with Plastics

The first step to repairing plastic bumpers is to identify the material in order to choose the method of repair. Auto body shops use ISO codes on the parts to identify the various families of plastics. They cross-reference the codes with charts from the suppliers or by accessing reference materials on the internet.

It is important that the collision repair technician determine the type of plastic they are working with so they know the proper welding procedure to use to avoid damage to the part.

Some plastics can be welded with an airless welder or hot-air welder; others require a hot glue type of procedure. Tests must be performed and welding procedures have to be done correctly to avoid adhesion failure. Some bumpers will melt with a slight color change and they will remain tacky in the area where they have melted.

Adhesive Repairs

The bumper repair technician must identify the type of plastic they are working with in order to be successful with adhesive repairs. Failure to properly identify the plastic results in adhesion-related problems.

Flexibility

Some repair materials are based on flexible and rigid plastics. Using the wrong material can cause cracking when the part is flexed or it may not provide the correct strength for the repair area.

Cleaning and Prep

Proper cleaning and prep is critical for proper adhesion and finish. Whether the technician is repairing or replacing the bumper, the part will need to be cleaned. The bumper being repaired is likely to be dirty from the road; the new replacement part can have contamination on it from the manufacturing process.

Auto body repair professionals should use a low-VOC surface cleaner or a special plastics parts cleaner to help prevent solvents from going too deep into the plastic. If solvents are too harsh, they go deep into the plastic and cause adhesion problems after repairs are done.

This is an overview of the process of working with plastics. Time is money in the auto body industry; therefore, many collision repair technicians choose to replace rather than repair plastic bumpers and other parts.

Technology allows us to repair many items that are often replaced. As resources become scarce and landfills become over-full, we really should consider repairing rather than replacing when possible.

Who Really IS the Best Auto Body Shop in New Jersey ?

Autobody Repair

Mountain biking is one of those sports that you have to be prepared for and in good shape. Since the terrains will be quite challenging and physically demanding, you have to think about various things to prepare.

The bicycles are specifically designed for road use and harsh terrains. Today's bicycles seem like something from the science fiction movie compared to the first one designed in the late 1800s. Among the first examples are the bikes modified for off-road travel of the expedition of soldiers from Missoula to Yellowstone, the USA in 1896.  

Mountain bikes have different characteristics than normal bike variety. They use features to increase durability and obtain optimal performance in difficult terrains. These differences include tires, handlebar, smaller frame and better brakes. Pedals even differ among the mountain bike models and can be platform or clipless. This also means that they range in price as well as quality.

The travel alone can take days in the rough terrain and you will have to set camp or plan your stay in a nearby place. This means that you should pack appropriately and that you shouldn't start your travel without the certain things.

Help local community

You will be tempted to make stops at the famous brands on your travels. This includes restaurants, hotels and other big chains you already heard about. But one of the benefits of mountain biking is that you will come across a lot of local small businesses.

Buy fruits and vegetables from the local farmers, stay at the bed and breakfast and eat at diners. This is a fine way to help the smaller and local business community. Also, it may prove more quality than eating junk food or cheaper than bigger chains.

Plan the bike route

There are many attractive places for mountain biking, and some are even famous for it. However, that doesn’t mean that you should go without planning your route. It is a recreational activity and you will certainly enjoy nature, but consider setting up goals.

Additionally, that will help you to plan the rides based on the terrain type, weather conditions and elevation. Choose the trails that fit your stamina and preparedness the best, as well as what you want to achieve. Some people enjoy mountain biking purely for recreation, while others want to lose weight or train for more demanding rides.    

Don’t forget insurance

Mountain biking is an extreme sport and can lead to injuries. Buy travel insurance so your possible medical costs are covered and in case your trip gets cancelled. Accidents happen and you can’t take a risk with your health or any unpredictable event.

There are various options for insurance and you can choose the one you consider the best for your mountain biking plan. However, don’t try to save money on important issues like buying appropriate insurance for yourself in case of injury, theft or delayed flights.   

Snacks, meals and beverages while travelling

Eating the right foods is important every day, but when you are doing something physically and mentally demanding then you have to make sure you’re eating properly. Mountain biking requires appropriate energy for the travel and you can achieve that through food.

It’s important to stay hydrated at all times and a water bottle should be always by your side. Fruits like bananas and apples are important for vitamins and natural sugars. Make peanut butter sandwiches and take canned food with you, like tuna for the protein.

For example, squash bananas, apples in the bowl and add blueberries and Japanese BCAA amino acids. Mix all that with milk and add whole wheat cereals you left to soak in water overnight. This type of breakfast is not only healthy but will keep you sated until you make a break for a snack by the road.

Don’t litter the environment

One of the advantages of mountain biking is that you will have an opportunity to enjoy amazing landscapes and natural beauties. This connection with nature will also keep you in the wild for a couple of days and that means that you will have to take care of the garbage.

Bring garbage bags with you, use recyclable materials and don’t litter around. Don’t throw away your garbage in nature, but rather wait until you encounter a settlement or garbage bin. Respect the wildlife and don’t try to pet the dangerous animals or hurt them out of fear. If you plan to ride through the parts famous for its wildlife, travel in a group and make noise so the animals would get out of your way.  

Check your bike

Before you start your journey, leave an emergency contact information in your passport and check your bike. You can also carry the emergency contact information in your wallet, and include the embassy number beside the friend or family member details.

You can take your bike to the bike shop for a more detailed check-up, but there are some things you should do on the spot. Drop your bike on the floor to see if anything is rattling or unscrewed. Test the breaks and tires to make sure that they’re working properly. Adjust the wheel and secure it tightly, as well as the headset.

If anything is not in order and you can’t fix it by yourself, it’s better to go back and seek professional help. The same applies if any damage occurs on the road. Don’t attempt to ride with the broken or unsecured bike since that can lead to serious injury.  

Finally

Think about safety first and approach all your riding plans that way. Mountain biking is an exciting sport that certainly deserves the attention and popularity it gained. However, just like any sport, it takes prepared and responsible people to participate.

How to Heat an Auto Body Shop

Goodyear Tire Deals

Students who graduate from Surry CommunityCollege’s Collision Repair and Refinishing Technology program can pursue careers as painttechnicians, body technicians, service writers, insurance adjusters, insurance estimators,auto detail technicians, and retail sales associates. Autobody classes are also offered to peoplewho would like to simply learn how to fix up their own vehicles as a hobby. Night classes are offered. Hello, my name is Jeff Boles, and I am theLead Instructor for Collision Repair and Refinishing Technology here at Surry Community Collegebetter known as the the Autobody program. We offer classes in painting and refinishing,nonstructural damage, structural damage, automotive MIG welding along with a plastics and adhesivesclasses. We also offer courses on special finishes,automotive detailing and autobody estimating. Diploma seeking students can choose to takea Work-Based Learning option where they can work for a company while also earning a classcredit. The Autobody students are working on a 1932Ford Roadster Project Car, which will be displayed at college and community events. Students also bring their projects from homeand can take the classes over in order to use the college equipment and facilities. Students like the flexibility of our program. We have students studying for a certificateand diploma, while some students are just taking the course for enrichment and to beable to repair their own vehicle. Students can earn a diploma or certificatein Collision Repair and Refinishing Technology and be ready for full-time employment in theAutobody industry or simply take Autobody classes for a hobby. I am a student at the Surry Early College,and I am taking the Automotive and Autobody classes. I am really enjoying the Autobody classes. I get to work on my own projects. They help me out. I am getting college credit and high schoolcredit. It’s also tuition paid. I don’t have to pay anything to take it. It’s really great for me. After I graduate, I am hoping to go into ashop. I am wanting to work for somebody for a while,and then after I get experience of how to run my own business and do my own thing, thenI want to open up my own shop. Well, behind me is a 92 Ford Ranger. I had it as my first vehicle. I wrecked it. When I wrecked it, I had a plan. My plan and my vision is to put Cummings turbodiesel in it. Right now I am fitting it to a 78 F-100 chassisand suspension. It’s got a Dana 44 straight front axle underit and a 9-inch rear, so that was already done. I don’t have to do the swaps or anythinglike that. I am just going to do a little bit of bodywork, put the Cummings in it and hopefully, it’s done. The work I do is very satisfying. I love working with my hands, and I love workingwith cars and seeing how they turn out. The instructors are very helpful. When I have a question, they are right thereto answer it. If I need something, some kind of guidance,they show me and then they let me do it. One of the reasons I chose to take Autobodyhere at Surry was that I have always wanted to paint cars give those custom paint jobs. That's one of the reasons I took it. This right here is my truck that I have beenworking on restoring it. I want to give it an aftermarket paint jobsomething that would look nice. The instructors here are helpful and knowledgeableon anything they need. They know their thing so whenever you needhelp or when you are doing something they will come and help you out. You get it done the right way. This is really exciting. You are always excited when you start somethingto get it done. I grew up as a tomboy working on a farm helpingmy paw. That’s probably what got me into likingand working on cars. I love cars. I like working in Autobody because I likeworking with my hands and working on cars and helping people. I am just going around helping people likeNancy over here. I help her a lot. The other day I helped her take an exhaustoff. I helped David sand his truck a little bit,and I been working on the school’s hotrod. I painted the bottom of it. I was just going to take automotive, but nowI have decided to take Autobody because most of these dealerships are going to have Autobodyand Automotive so that’s a double whammy. When I get out of college, graduate, I’dlike to work at a dealership. I hope to get a job at a Jeep dealership becauseI love Jeeps. Autobody professionals make about $39,000per year or more based on experience. Extremely successful Autobody shop ownerscan make in the neighborhood $60,000 to $100,000 in the Piedmont Triad area. High school juniors and seniors can take Autobodyclasses tuition-free through the Career & College Promise dual enrollment program. For more information, go to www. Surry. Edu. You can also follow the program on Facebook@SurryAutobody.


Brake Check in New Jersey

It happens to all of us at one point in time. We get into an automobile collision and need the best auto body shop in New Jersey. Hopefully, it is not too bad and we are not seriously injured. But usually the car does not fare as well and comes away with significant damage.

What is the next step after your collision and you need an auto body shop?

Likely, after informing the insurance company you take your vehicle to one of their “approved” vendors.

Here is what happens next. You tell the insurance company what company you choose. By this time they have already taken phones of the car and know how extensive the damage is. If you need an expert to take a look, make sure you go to a repair shop in New Jersey. 

They have a computer system that gives them a printed estimate stating what the replacement parts and labor will be based upon a set hourly rate.

This statement is given to the body shop. It comes with a break down of what the labor and parts “should” be and the company has to usually be able to totally fix the car for that price.

Bike Brake Overview

Keep in mind that what is printed out represents the best case scenario and doesn’t allow for items on the car that was missed or problems that come up.

Now here are some things to watch out for. a local auto body shop in New Jersey is operating under very, very thin margins and the incentive to “cut corners” is huge. Getting an extra $300 off a job can really add up over the course of the month when you are talking about doing at least 3-5 vehicles every week.

Mechanical engineering

Replacement Parts in Auto Body Shops

Make sure the parts being used on your car are OEM parts. These are replacement auto body parts in New Jersey are sent directly from the car manufacturers and are designed with the same specs as the vehicle came with.

Where To Buy Tires

Aftermarket parts can be significantly cheaper yet are not the same quality and make not hold up the same in the event of another accident.

No Realignment? Talk to Your Auto Repair Team!

The frame is usually somewhat bent when a car goes through an accident of any kind. It needs to be properly realigned. You need a serious all hands on deck auto body shop to take care of you here.

Unfortunately, because the money made off one car can be very little the propensity to skip this step is very high. Later down the road this will cause your car to not drive straight but at a tilt and your tires will wear prematurely. So if you need to brush up on some tire repair, ask your mechanic straight away.

Using Bondo (Fillers) Instead of Replacing the Part

Filling any damage in with bondo is not bad in itself. If you know what the auto body shop in New Jersey is doing, they tell you, and this is what you are paying for then it is fine.

The problem comes in when you think you are getting a vehicle back that is 99.9% the same as before it was wrecked and it is not. Filling a damaged part in with filler rather than replacing the expensive part is a common tactic and you want to make sure it is not done on your vehicle.

What Is An Auto Body Shop?

All damaged parts should be replaced unless you are paying a lower price for the car to just be fixed (in the case you want the cheapest price and do not care about having a car exactly the same as before). Again, you should really speak to your best auto body shop nearest you!

Keep in mind that most auto body repair shops are honest and are surviving in a tough industry.

Wheel alignment or 'tracking' is an essential aspect of vehicle maintenance. Often done when you are having your tyres replaced, wheel alignment readjusts the angles of your car's wheels according to the manufacturer's specifications.The benefits of wheel alignment include: Reduces tyre wear and therefore increases the life of your tyres Keeps your vehicle running straight and true (rather than 'pulling' to one side) Improved handling Increased fuel efficiency Improves your driving safety A smoother ride All four of your wheels need to be aligned for your car to run correctly. If only the fronts are adjusted (sometimes known as a two-wheel alignment or 'toe and go') and your rear wheels are still out of alignment, you may still experience pulling, excessive or uneven tyre wear and a crooked steering wheel.Why not book a wheel alignment when you next buy replacement tyres? You can find great deals by searching for cheap tyres online, and even have a mobile fitting van come out to you rather than take time out of your schedule to visit a garage.Wheel alignment can seriously affect the quality of your ride, the efficiency of your handling, the precision of your steering and can lead to 'pulling' which makes your vehicle veer to one side while attempting to drive straight. All these things can become dangerous over time, so ensure that your car is maintained and in top condition for your own safety.

What to Look for in an Auto Body Shop

The insurance companies nickel and dime them at every turn and they are made to give them at time ridiculous discounts to get any business. That’s why having an auto body shop in your corner can’t be stressed enough.

Nevertheless, all an auto body shop should be on is your side and corners should not be cut at your expense and being watchful is just a smart way to go.

Your Auto Body Shop In New Jersey Should Help You With What Car Needs Exactly?

Frame Straightening

- Hey Youtubers, Donnie Smith here, and welcome to my videoseries on auto estimating.

This series, we're gonna talk about how to write estimates on cars, you know, cars that have been in a wreck or has got a dent.

How do you write an estimate? (screeching) (boom) So to kick this video off, I'm gonna start it with a quote.

It says "organization is what you do before you do something,so that when you do it, it is not all mixed up.

" So in this first lesson we're just gonna talk about estimates, what are estimates, supplements, how they're generated,who needs estimators, and kinda setting up yourestimating environment.

As an estimator, it'simportant to fully understand what all the purposes an estimate serves.

And it's also important to properly set up your estimating environment to become efficient at generatingthorough auto estimates.

And this also includes the ASE A1 Position thevehicle for inspection.

So what are estimates? I mean estimates, they'recalled different things, like a damage report, damage estimate, auto estimate, but they arebasically the same thing.

A damage estimate however, is more than just a sheet of paperlisting the total cost of the repairs.

An estimate is a contractor a mutual agreement between two people.

As with real estate,the owner and the buyer, they must agree on a price,and they sign the document, the contract and it's a mutual agreement, and a auto estimate, youknow, it's the same way.

There needs to be an agreement between the repair shop and the customer and the customer shouldsign that agreement to authorize the repairs.

Now one thing that the estimator needs to explain to the customer, and this is somethingthat's really misunderstood, is the estimate, it is just an estimate.

It could change, it'snot the final invoice.

A lot of things could factor into this.

Maybe there was some hidden damage.

Well, of course, they wouldneed to contact the customer and let 'em know, but it isgonna change the estimate total.

Maybe there was a price increase on parts, maybe that changed.

There's a lot of things that may make the finalinvoice a different price than the estimate was,and you as an estimator need to explain this tothe customer up front so they understand.

Any additional charges, you're gonna need to write a supplement.

The customer needs to understand this, and a lot of times you're dealing with insurance companies as well, and of course, they arefamiliar with the process.

And not only do you need to have good communication skills with the customer, you're also gonna have to work with the insurance, in many cases.

Not every job is an insurance job, but a big percentage of 'em are, so you need to be able to communicate well with the insurance company.

Now every insurance company,that's gonna be different, the way they do it.

Do you pick up a phone, call 'em, are you a direct repair show for 'em, that is gonna vary a lot.

But whatever procedure you do use, your shop, the insurance company, whatever relationship you have, it's gonna be your responsibility to make sure that the insurance company and the customer, that you communicate with them and they allknow what is going on.

Now the insurance companymay be paying for everything, everything except the deductible in some of these jobs, but keep in mind, the owner of the car,that is your customer.

That's the one that's gonna bring it back to you if they have problems, have another accidentor anything like that, so keep in mind that you'reworking for the customer, the car owner.

It's your responsibilityas the repair shop, to repair that car back to its pre-accidental condition.

So once everybody agreesto the supplements, the additional charges,the insurance company and the customer, now you can include these additional chargesinto the final invoice.

So there's different methodsfor writing estimates.

For a long time, Iremember whenever I started writing estimates, it was all by hand, using Mitchell manuals is what we used.

I'm sure there was other books as well, estimating guides, but we'd have to look up the car, then we'd have to look up the part, and we'd manually write all that in, write the price in, the labor for it, andthat took a lot of time.

Nowadays, they have computer estimates.

It's a lot faster, youput all the information into the computer, and it'smore of a point and click.

But even though they haveall the computers today, I still think it's important, if you're interested in estimating, I still think it's very important to learn to write one by hand.

Now the reason I say this is, you wanna understand the process cause a lot of the computer systems, they will deduct for overlap, for example.

They'll just automatically put that in.

Well you don't have to worry about it because it puts it in, but if you never understandthe process and why, you don't wanna look dumb to the customer.

Maybe the customer says "Well, what's this deduct for overlap?" You don't wanna just tell 'em.

"Ah, don't worry about it, the computer puts that in there.

I don't know what it is.

" You can honestly sitthere and explain to 'em, because you know the procedure and why it deducted for overlap.

And I think the better understanding of the procedures you have, the better estimator you're gonna be, the less un-includeditems you're gonna miss, and I think it's gonna make you a much better estimator, to understand the full process.

Now there is a sequence to estimating.

Most guides, like the Mitchell, the guides they have.

We use use CCC now, thecomputer system, CCC 1.

There is a sequence thatmost of these follow.

Now I don't know every system out there, but all the ones thatI use have a sequence, and it starts with the front bumper cover and ends with the rear bumper cover, so it starts from front to back.

So when you're writing an estimate, of course, you wanna startwith the front panels and move backwards, so youcan have the same sequence, so when you go to the computer, or if you're using an estimating guide, you can just follow that sequence, make it much easier forya, not flipping' around.

So follow that sequencefrom front to rear.

Now there's also anothersequence that it follows, and that's from outside to inside.

So for example, the front bumper cover, of course the bumpercover's on the outside, that's gonna be first.

Well, what's underneath that bumper cover? Well there's a impact absorber.

There's a reinforcement bar.

And it just kinda goes from outside to in for each part group.

So who needs estimators? Well, basically every repair shop.

Every body shop, dealershipthat repairs cars, they're gonna need an estimator and they need someone thatcan write the estimates, they can go talk to the customers, they can look at the car, and be able to writethe estimates for them, and also insurance companies, they also need a, theymay call 'em appraisers or estimators, they need people that will go and look at these cars and write the damage report for 'em.

Now smaller shops, you know, body shops, it may be the owner, itmight be the manager, the foreman that writes these estimates, but a lot of your larger shops, they have people just for estimating and some shops have multiple estimators.

And again, the title for this, it varies.

There is tons of them, customer advisor, a lot of dealerships and body shops call 'em different things, but it's basically someone that visits with the customer, you'reusually the first contact, that sees the customer, and you go and look at the car, andyou basically communicate with them for the entire process, from the time you write the estimate to take the keys and givethe keys back to 'em.

So it is very, veryimportant for this position if you're considering this as a career, it's very important to havevery good communication skills.

Now let's talk about settingup the work environment.

As with any workenvironment, it's important to be set up properly.

If you wanna be able to write estimates, generate estimates,thoroughly and efficiently, you need to be set up properly.

Now I remember when I usedto write a lot of estimates, I just wrote 'em out in the parking lot, and I'm sure there's still a lot of shops that do that, but if you have a stall set up for estimating, it's really gonna simplify the process and it's really gonna minimize the amount of supplements that you have.

And I think whenever inspecting a car, good lighting is very important and even if you have good lighting, or you're out in the parking lot, you know sunlight, that's good lighting, but there always are gonna be areas in these cars, maybe you gotta look up under the dash, or maybe you need to crawl up under the carand look at something, you really need aflashlight, a good flashlight to look at these things.

Because if you can't see inthose dark areas too good, it's really gonna be hardto determine what's wrong, and probably this is gonnalead to a supplement, once you tear it down, and that's something you wanna eliminate The less supplements, the better, which we'll talk about that more later.

And many times, the estimator's gonna need to inspect underneath the car.

Now if you have a stall set up, and you have a lift and everything, that works really good.

But not all shop estimatingstalls have that, but you do need to have a, nearby, in your stall, you need to have to have a jackand some jack stands, that if you do need to lift it up, that you can crawl under there to look at some suspension parts or something that may be damaged.

And it's also important to be well organized in your work area.

Be organized, clean, andprovide a easy workflow, to move cars in and out.

It'd take up a lot of time if you have to shuffle cars around, you pull a car in, you're in the middle of estimating it, you have to back it outto let another car out.

If possible, you don'twanna be in that situation, so have your stall setup to where you can pull a car in there and leave it, and it does not disturb the rest of the workflow with the rest of the shop.

And also stay organized.

You need to have the tools that you need.

You don't wanna haveto go through the shop, borrowing tools fromdifferent body techs in there.

Have the tools that you need.

You're gonna just need some basic tools, if you might have to do alittle bit of tear-down, but have your own tools set up in there, have your jack stands, your jack, for the things thatyou're gonna need to do.

Cause it's not gonnalook very professional if you're trying to write an estimate and you're running through the shop or going to grab a technician to come and jack the car up and all that.

So just be sure that you havethe things that you need, and make sure in your estimating area that everything has aplace, and that's it's in place when you're not using it.

So what tools do youneed in your work area? Well this is really gonna vary, depending on your shopand the shop's procedures and how they do write their estimates, it's gonna vary, but I'm gonna give you some common tools that most of you will have to use.

The estimator's gonna haveto take photos of the damage, photos to help others seewhat the estimate sees.

They need to tell a story.

Photos are documents to prove the extent of the damage to the customers and to the insurance company.

You need to take photosof the overall damage, just a big picture of what happened, but you also need to take photos of the individual parts that are damaged.

Now I've used iPhones, cell phones, they work good, but youknow Larry Montanez, he's a consultant, and he says you really need a better camera, a high-quality camera,one that can zoom in, especially like on someof your individual parts where you need a really good picture, he thinks probably youneed a higher-end camera.

And especially a lot of the repair shops working directly withthe insurance company, just from the photos, soit probably is a good idea to have a high-qualitycamera to take these photos.

And I remember whenever Iwas an insurance adjuster, we used to use a 35-millimeter cameras, and we'd take these pictures, and we would have to go get 'em developed, and that was pretty expensive.

I mean today, it is so simple.

You just take a picture,plug it into the computer, and there it is, and you can send it to the insurance company, the customer, or whoever.

And another good thingabout having a camera.

Most cameras, most cell phones, sometimes you may need to take a video.

I mean a video may tell the story better than just a still picture.

So most cell phones andcameras have the capability to take a quick video clipof what you're talking about, maybe you can point at something or talk about what you'retrying to point out, and sometimes that mightbe the easiest thing to do.

And of course, like I mentioned earlier, you need good lighting, and part of that, you're gonna need a flashlight because some of those places, I don't care how good the lighting is, you're gonna need a flashlight to see some of those dark areas.

Now you're gonna need some hand tools.

You're probably not gonna need a full, roll-around box like alot of your techs have, but just some basic tools, screwdrivers, wrenches,sockets, trim tools, just some of those basic things.

Maybe you need to take a bumper cover off or a door panel, just enough tools to get that off, justsome basic hand tools.

And you're just gonnaneed a paint mil gauge, and this just basically measures the paint to let you know are yougonna have to strip, partial strip, or you can youjust final sand and paint, because that's gonna determinethe cost of the estimate.

And it's also a good ideato have a body filler gauge or magnet to determine the area that you're gonna be working on, has it got prior damage or body filler, that may eliminates some problems that you could run into.

And you're gonna needsome measuring equipment, a tape measure and tram gauge, for sure, and there might be caseswhere you really need to put it on the frame machine, and get a computerized reading of the extent of the damage.

And you're gonna need a scan tool.

A lot of times with yourelectrical components, you don't know until you scan it, so you'll need a scan tool so that you can read the codes.

And you're gonna need estimating guides or a computerized system, so that you can get the parts prices, the labor times and all that, probably just about everybody has moved to computerized systems.

I know CCC 1, Mitchell,and there's others too, but you're gonna need something like that or there might still bea few shops out there that do use the estimating guide, smaller shops that don'tdo a lot of volume, they may use the estimating guides, but you're gonna need something that you can look up the car, get the price of the parts, and the labor time for those parts.

And you're gonna need some office supplies to write customers' names down, and notes that you'regonna take during the day, there's gonna be a lot of them.

You need pencils and pens and notepads, things like that.

You're also gonna need a place for your computer, of course, and you're gonna need a phone.

You are gonna be on the phone a lot.

You're gonna be calling theinsurance companies, customers, updating them on theprogress of their car, so you need to have an area that you can concentrate in and have a phone availablewhen you need it.

And you're gonna need an area to consult with customers.

Now this may be the areawhere you write the estimates and all that or maybe a separate area.

It's just going to depend on your shop and how they're set upand how they do that, but you're gonna need an area to consult with the customers, talk to them, and explainthe process to 'em, and explain the estimate to 'em, and hopefully sell the job to 'em.

And I know there are someshops that even have an area for the insurance adjusters, they have their own areato generate estimates and to consult with customers.

As always, I appreciate youfor watching these videos.

I hope you enjoyed the lesson about auto estimating.

I hope that you learned some from that.

And if you did, if you liked the video, be sure and give me athumbs up, give me a like, subscribe to us if youhaven't subscribed to it.

Share this with your friends and if you have any questions or comments, just be sure and go down below this video in the comments section, and there you can leavea question or a comment.

And remember, if something's worth doing, do your best and have a blast doing it.

Thanks for watching.

Take care, and we'll see you in the next video.

(rock music).

Bike Brake Overview


Best Auto Body Shop in New Jersey