If you’re looking for an auto body shop in New Jersey make sure you give Peotters Tire & Auto a call as the New Jersey areas premier tire and brake shop. Today’s vehicles are made with many different types of fuel-saving materials like lightweight alloys and plastics. It is important for an auto body shop in New Jersey to be aware of the different materials and techniques used for repairing them.
Auto body shops like Peotter’s Tire and Auto and collision repair services refer to manuals for instructions repairing bumpers. The different material types require various finish materials, removal and installation procedures.
When a plastic bumper is cracked or has a small hole it can be repaired to look as good as new. Replacing the bumper is wasteful and it creates unnecessary debris for our landfills.
A good, eco-friendly auto body shop in New Jersey will only recommend replacing the bumper if the damage is severe enough that repair time would be considered unreasonable and quality of results would be unsatisfactory.
One of the most important parts of your bike is the braking system. Without working brakes you would soon get into big trouble. Keeping your brakes in best shape is important. Fortunately, it is also relatively easy. Here is short bike brake overview.
Nowadays, you have three popular types of brake systems:
– Rim Brakes
– Disk Brakes
– Hub, or Drum, Brakes (including the Coaster Brake)
A number of other types of brakes have been used and are still used but they are not as popular as the three types mentioned above. Note that some recumbent bikes have no brakes. Obviously, don’t use such bikes in traffic. You may have noticed that track bikes are fixed-gear bicycles without any brakes. Actually, they don’t even have freewheel. But they are only used at a velodrome.
The old foot brake is not as popular as it used to be. It is also known as coaster brake and belongs to the drum brake category. The first coaster brake was invented back in 1898. The foot brake has one important advantage, since it is internal it works fine in all weather conditions. Foot brakes work for years without any maintenance but if it breaks, repairing it is generally very complicated. Since coaster brakes can only be applied to rear wheels, skidding is always a possibility. Another problem is that the brake can overheat if used too much. A practical problem is that the pedals need to fairly level, otherwise it will be difficult to brake. But combination of a hand-operated front wheel brake and a foot brake is efficient.
Mountain recumbent bikes generally use disk brakes. The system is simple, a metal disc is attached to the wheel hub. When the brake is applied, the pads squeeze against the disc. There are two types of disk brakes, mechanical and hydraulic. Disk brakes have many advantages but they are generally more expensive and heavier than other brake types. They tend to perform well in all weather conditions. They don’t overheat like rim and hub brakes when heavily used. Unlike rim brakes, they don’t heat up the rim and cause the tire pressure to increase.
Rim brakes are cheap, light-weight and relatively easy to maintain. The principle is very simple, two brake pads, typically made of rubber, squeeze the rim and slow down the cycle. You have a number of different models of rim brakes. The most common are Cantilever, V and center-mount brakes. Their main disadvantage is that they work badly in wet conditions. In muddy conditions, clogging can be a problem. They can also overheat the rim, which increases the air pressure in the tire. This could in worse case cause the wheel to explode.
Obviously, your budget will determine which stationary bikes are worth having a closer look at. Often the difference between the bikes is small, despite that the price difference is large. Although exercise bikes are fairly simply devices, some of them can get noisy after a couple of months. It pays off reading reviews from buyers of the stationary bikes you are interested in. For most people, the number of workouts you get with the bike is not especially important. Nowadays, almost all exercise bikes include the very few basic workouts you really need. More important is that the bike is sturdy, a flimsy bike is very annoying to use. Almost all of the exercise bikes from the well-known manufacturers are of good quality. But if you are thinking of buying a cheap exercise bike from an unknown manufacturer, make sure to test it thoroughly before buying it.
Note that especially recumbent exercise bikes are large and heavy, so it can be both difficult and expensive to return them. Thus, the cheapest bike may not the best exercise bike to buy.
The cost of repairing small abrasions, cracks and holes in plastic bumpers is often much cheaper than replacing the part.
Of course, many collision repair technicians would rather replace the part and charge a fee for their labor plus mark-up on the price of the part because they lack in cosmetic repair skills and it is easier to warranty the work.
Working with Plastics
The first step to repairing plastic bumpers is to identify the material in order to choose the method of repair. Auto body shops use ISO codes on the parts to identify the various families of plastics. They cross-reference the codes with charts from the suppliers or by accessing reference materials on the internet.
It is important that the collision repair technician determine the type of plastic they are working with so they know the proper welding procedure to use to avoid damage to the part.
Some plastics can be welded with an airless welder or hot-air welder; others require a hot glue type of procedure. Tests must be performed and welding procedures have to be done correctly to avoid adhesion failure. Some bumpers will melt with a slight color change and they will remain tacky in the area where they have melted.
The bumper repair technician must identify the type of plastic they are working with in order to be successful with adhesive repairs. Failure to properly identify the plastic results in adhesion-related problems.
Some repair materials are based on flexible and rigid plastics. Using the wrong material can cause cracking when the part is flexed or it may not provide the correct strength for the repair area.
Cleaning and Prep
Proper cleaning and prep is critical for proper adhesion and finish. Whether the technician is repairing or replacing the bumper, the part will need to be cleaned. The bumper being repaired is likely to be dirty from the road; the new replacement part can have contamination on it from the manufacturing process.
Auto body repair professionals should use a low-VOC surface cleaner or a special plastics parts cleaner to help prevent solvents from going too deep into the plastic. If solvents are too harsh, they go deep into the plastic and cause adhesion problems after repairs are done.
This is an overview of the process of working with plastics. Time is money in the auto body industry; therefore, many collision repair technicians choose to replace rather than repair plastic bumpers and other parts.
Technology allows us to repair many items that are often replaced. As resources become scarce and landfills become over-full, we really should consider repairing rather than replacing when possible.
Who Really IS the Best Auto Body Shop in New Jersey ?
Regular wheel alignments are an important part of conscientious car maintenance. Unfortunately, many car owners fail to understand the importance of good wheel alignment, and therefore don't have their alignment checked often enough.Here are five reasons why getting regular wheel alignments is good for your car, your bank account, and your peace of mind.1: Better gas mileage. When your wheels are aligned properly, it cuts down on rolling resistance, which means that you car doesn't have to work as hard or burn as much fuel in order to move forward. This is good news for everyone: Not only do you spend less money on gas, but you also get the satisfaction of knowing your car is responsible for less pollution.5: Easier to drive. One of the biggest advantages of having your wheels aligned properly is that your car is easier to drive. No annoying pull to one side or the other. It's much easier and more pleasant to drive a car that has had regular wheel alignments.As you can see, there are many reasons why a car owner should be sure to get regular wheel alignments. Not only does having your wheels aligned properly save you money on gas, tires, and other potential repairs, but it also gives you better peace of mind to know that your car is being cared for properly.
A car is a very complex piece of machinery. Each individual part is vigorously tested before it ever goes into production models and, like a chain, relies upon every other part in order for the vehicle to function. One poorly built aspect can cause serious malfunctions leading to costly repairs, or worse, an accident.
Even something as simple as the glues used to hold a tire tread to the rest of the tire is an integral part of a car or truck. Just ask Firestone. That exact issue resulted in a costly recall of thousands of tires, legal recourse, as well as over 500 injuries and 148 deaths. All of which could have been prevented with only a little bit of testing. Be wary of new designs rushed into mass production.
Often a seemingly superficial part to a vehicle actually provides a significant amount of safety. Everyone knows a windshield protects the driver and passenger from wind and debris. Most also know that they are also designed with a thin film that prevents them shattering upon impact. What most people don't know is that the windshield provides over half of the structural support for the car during an impact. The windshield combined with the frame of the car makes it structurally safer than a car without one. Cracks in a windshield can greatly reduce their protective power, as well as obstruct the driver's view which is even more dangerous.
Replacing or repairing cracks and chips in a windshield should be done by trained professional at a certified and insured auto glass or body shop. Avoid independent installers and people who operate only out of their truck. The adhesive used dries in about an hour, so if any body shops quote you a turn around time less than that, they are either lying or don't know what they are doing.
Also, it is a good idea to know a little bit about the glass windshields they will be installing. There are three aftermarket windshields that exceed OEM and DOT specs, they are P.P.G., L.O.F. and Plinkington.
Other suitable windshields are made by the car factory. Ford's factory glass is called Carlite, and Chrysler's is Safeguard. Expect to pay more money for factory glass. A good auto glass installer will sand all the rust around the windshield after it is removed, and then prime and paint it before installing the new windshield. It is best to go with body shops that have been around for at least five years as they are more likely to be around to guarantee warranties and make repairs in the future. Many shops will also work with your insurance carrier to get you the best price on a windshield, sometimes completely paid for by the insurance company.
Body repair is another story and can become very expensive. Newer cars with plastic and fiberglass bodies are almost impossible to repair, the body panels are often much easier to just replace, and that can be accomplished by almost anyone with a wrench and screw driver. Repairing dents and rust on metal bodies can be time consuming as well as expensive. It also requires a matching paint job which is similarly expensive. If the dented or rusted panels can be removed it makes it much easier. Dents can be pounded back into shape. In addition to this, it is often just easier to work on and paint a detached piece. Some work can be done by the average Joe, but extensive body work should be done at an established body shop.
- Brake Check in New Jersey
- Tire Repair in Summit
- Auto Body Shop in New Providence
- Tire Repair in Berkeley Heights
- Brake Check in Mountainside
- Brake Repair in Chatham
- Tire Repair in Madison
- Tire Repair in Springfield
- Brake Repair in Maplewood
- Brake Check in Vauxhall
- Best Auto Body Shop in Short Hills
- Brake Repair in Kenilworth
- Tire and Brakes in South Orange
- Tires and Brakes in Morristown
- Tire and Brakes in Florham Park
- Tire Repair in Livingston
- Auto Body Shop in Union