It happens to all of us at one point in time. We get into an automobile collision and need the best auto body shop in Madison. Hopefully, it is not too bad and we are not seriously injured. But usually the car does not fare as well and comes away with significant damage.
What is the next step after your collision and you need an auto body shop?
Likely, after informing the insurance company you take your vehicle to one of their “approved” vendors.
Here is what happens next. You tell the insurance company what company you choose. By this time they have already taken phones of the car and know how extensive the damage is. If you need an expert to take a look, make sure you go to a repair shop in Madison.
They have a computer system that gives them a printed estimate stating what the replacement parts and labor will be based upon a set hourly rate.
This statement is given to the body shop. It comes with a break down of what the labor and parts “should” be and the company has to usually be able to totally fix the car for that price.
Tips on Why Wheel Alignment Is Important
Keep in mind that what is printed out represents the best case scenario and doesn’t allow for items on the car that was missed or problems that come up.
Now here are some things to watch out for. a local auto body shop in Madison is operating under very, very thin margins and the incentive to “cut corners” is huge. Getting an extra $300 off a job can really add up over the course of the month when you are talking about doing at least 3-5 vehicles every week.
Bike Brake Overview
Replacement Parts in Auto Body Shops
Make sure the parts being used on your car are OEM parts. These are replacement auto body parts in Madison are sent directly from the car manufacturers and are designed with the same specs as the vehicle came with.
Aftermarket parts can be significantly cheaper yet are not the same quality and make not hold up the same in the event of another accident.
No Realignment? Talk to Your Auto Repair Team!
The frame is usually somewhat bent when a car goes through an accident of any kind. It needs to be properly realigned. You need a serious all hands on deck auto body shop to take care of you here.
Unfortunately, because the money made off one car can be very little the propensity to skip this step is very high. Later down the road this will cause your car to not drive straight but at a tilt and your tires will wear prematurely. So if you need to brush up on some tire repair, ask your mechanic straight away.
Using Bondo (Fillers) Instead of Replacing the Part
Filling any damage in with bondo is not bad in itself. If you know what the auto body shop in Madison is doing, they tell you, and this is what you are paying for then it is fine.
The problem comes in when you think you are getting a vehicle back that is 99.9% the same as before it was wrecked and it is not. Filling a damaged part in with filler rather than replacing the expensive part is a common tactic and you want to make sure it is not done on your vehicle.
All damaged parts should be replaced unless you are paying a lower price for the car to just be fixed (in the case you want the cheapest price and do not care about having a car exactly the same as before). Again, you should really speak to your best auto body shop nearest you!
Keep in mind that most auto body repair shops are honest and are surviving in a tough industry.
(upbeat music) - Hey, this is Donnie Smith.
Have you ever overground metal, making it too weak and too thin? Well it's not that hard to do with these thinner metals.
What about when working with body filler? Have you ever gotten it in cracks, gaps, other placesthat you don't want it? Takes quite a bit of time to get that out of there and clean it up.
So if you'd like to learn some tricks, how to prevent over-thinning your metal when working with thin metal, and how to keep fromgetting all the body filler in the places you don'twant it in the first place, then you're in luck, because that's what we'regonna show you in this video.
Alright, let's just goahead and get started.
What we're gonna do to eliminate grinding a lot of the metal off,is to use a DA Sander, and we can use 36 grit, or 80.
I'm using 80 here.
That usually works well.
May take just a little bit longer to remove the paint coatings, but you're not gonna chancegrinding too much metal off.
This does not take the amountof metal that grinding does.
Now with thinner metals,I would recommend this.
Now if you're working on older vehicles, grinding may be a little quicker, and that may still work fine.
Okay, now for the tip of how to eliminate getting body filler in places you don't want it, and that's simply to mask it off.
On the edge, I don't want the body filler wrapping around the edgewhere I have to clean it up, so I'm gonna mask that off.
Any gaps, for instance here, there's a, where the molding goes, I don't want body filler to wrap in there where I'm gonna have to sand it out, so I'm gonna use the bodylines that's on the car, and use that as a dividing line to make nice, sharp lines at, so that the body fillerdoes not get in these areas.
(upbeat music) Okay, now I'm mixing thebody filler up in the tube.
I'm gonna let the air out of the cap, so that it'll mix well.
And once I remove some of the air, I'll put the cap back on, and now I'm just gonnamix it inside the tube, because this hardener reallydoes separate a lot in there.
If you don't do this, you'll have liquid-ysubstance that comes out, and you don't want that, so be sure that you mixit up well in the tube before you use it.
Now I've already got somebody filler out here, and I used a paint stick toput some on this mixing board.
And I'm gonna get this hardener, I'm gonna apply a stripfrom edge of the body filler to the other, and that usually is a pretty good mixing ratio.
And notice I'm using a spreader to mix it.
I'm not using a paint stick to stir it, because that could put air bubbles in it.
If you get air bubblesin your body filler, that's gonna create pinholes, whenever you go to sanding body filler.
So it's always best towork the air bubbles out.
Just spread it out on your filler until it's nice and uniform.
You don't want there tobe any hardener streaks.
You wanna mix it until it's one color.
(upbeat music) Okay, now I have the filler mixed good.
It's nice, uniform, one color.
We don't have any hardener streaks in it, so we know that it's mixed well.
I'm gonna apply the body filler.
Now to do this, I'm gonnaapply a tight coat first, and what that is, iswhere I take a thin coat of body filler, and push really hard down on the spreader, so thatI push it into the metal.
That helps it adhere better to the metal, so that you don't have any problems with adhesion at a later point.
Now once I get the tight coat on, I come back with a fill coat, and that's where I'm gonnaput a little bit less pressure on the spreader, which allows it to fill the damaged area in.
(upbeat music) Okay I have the fill coat applied.
Now here's a tip for you to eliminate a lot of the sanding, and that is to work on your edges, because if you have real hard edges, it's gonna take more sanding.
So what I'm doing here, is I'm using the spreader, and on the edges I'm kind of feathering that body filler out, so that edge is a real thin layer, and you don't have that big, hard edge to try to sand out.
Okay, now let this setup for just a little bit, and you don't want to do it immediately after you apply the body filler.
You wanna let the filler set, but you don't want it to be dry either.
But as it's kind of in its green state, go ahead and pull the tape off.
This will leave you nice clean edges.
And also before it fully cures, you can block sand lightly, you don't wanna sand too hard, just to help level someof the highs and lows.
Okay, now I allow it to dry, and started block sanding it.
Now I'm starting out with 36 grit, because that's gonna levelthe filler really fast, but notice that I'mstaying within the filler.
My block is not slidingout onto the paint, because I don't want those deep scratches getting onto the paint surface.
I'm just wanting to level the filler.
(upbeat music) Also notice that I'm sandingin different directions.
I'm not just going at oneangle the entire time.
So I change it up.
And what sanding indifferent directions does, is it's gonna help youget a more level surface.
So always sand in different directions.
(upbeat music) (sanding) (upbeat music) Once you have it level, switch to 80 grit.
That's what I'm doing here.
First, I'm gonna apply some guide coat, and this just to helpidentify highs and lows, and you'll know whenever you get rid of the 36 grit scratches.
Makes it easier to see this way.
Now also notice I am sandingout on the paint a little bit.
I'm not going too far, but you do wanna sand out further than you did with your 36 grit.
You wanna make sure all 36 grit scratches are removed during this step.
(upbeat music) Okay I finished blocking, and I'm feeling for high areas.
And usually if you seemetal spot areas like this, that's gonna indicate that it is high.
And that happens sometimes, and if it does, what you need to do is get your pick hammer, and lightly tap down on those metal areas.
And what this is gonna do, is it's gonna lower that metal.
(upbeat music) And here's another tip for you.
If you're having problemsfilling the bodywork, and determining highs and lows with your hand, with your bare hand, use something like this, a wipe all, or a towel or somethingto put between the panel and your hand.
And this may help you be able to feel the highs andthe lows much better.
Now I'm gonna use the tape, because I'm gonna be applying some putty, so I'm gonna do the same thingI did with the body filler, the edges, and that indention where the body side molding goes.
I'm gonna tape all that off, to keep all the filler out of that.
Now when using putty, it lays out a littlethinner than body filler, so I usually just go halfway, rather than from one edgeof the filler to the other.
So I'm gonna do about halfthe amount of hardener.
(upbeat music) But everything else is basically the same.
Mix it until it's one uniform color.
Don't want any streaks in there.
And the good thing aboutputty is it's thinner, and it's easier to get a nice skim coat, but you do wanna do the tight coat, followed by a fill coat.
And another thing about a putty, is you can go over the entire repair area, from paint edge to paint edge, and that helps any imperfections you had in your sanding flaws, or sanding scratches,or anything like that, it's gonna fill in.
(upbeat music) And after allowing it tosetup for a few minutes, now I'm gonna peel the tape.
(upbeat music) Now when sanding finish putty, I'm not gonna start out with 36 grit.
I'm gonna start out withthe 80 to level it out.
And also I wanna let it fully dry.
I really don't wanna try to sand putty in its green state, so I'llallow it to dry all the way.
Then I'm gonna get 80 on a block, and I'm gonna sand it.
And I'm gonna cross sand it.
Make sure it's good and level.
(upbeat music) Once I have it leveled with 80, I'm gonna use the guide coat, and then I'm gonna comeback with 150 to 180.
I'm using 150 here I believe, but anywhere between 180and 150 will work fine for smoothing out your 80 grit scratches.
And this guide coat, it will help you identify any lows that you may have if there are any, or let you know whenever you got all the 80 grit scratches sanded out.
(upbeat music) And one last thing you wanna do, before you send it offto start priming it, you wanna make sure it fits.
Make sure everything aligns.
Make sure that your body work is right.
So you're gonna have toput it up to the car, and make sure everything works.
(upbeat music) Always, thanks for watching this video.
Be sure and share it with your friends.
Give us a thumbs up, a like, and be sure to subscribe to our channel.
Also be sure to go to CollisionBlast.
And there we have hours of free autobody and painttraining videos like this one, and a lot of other resources for you.
Thanks again for watching.
Have a safe and productive week, and we'll see you in the next video.
How to Pick the Right Auto Body Repair Shops
The insurance companies nickel and dime them at every turn and they are made to give them at time ridiculous discounts to get any business. That’s why having an auto body shop in your corner can’t be stressed enough.
Nevertheless, all an auto body shop should be on is your side and corners should not be cut at your expense and being watchful is just a smart way to go.
Your Auto Body Shop In Madison Should Help You With What Car Needs Exactly?
rev up your engines, today I'm gonna showyou how to spot a scam body shop before you get towed into one and it's too late,okay it happens to everyone eventually you get in an accident, then you have tohave your car towed to a body shop, the last thing you want is to be in anaccident be knocked around and then the tow truck guy comes and you let himdecide where to tow it, you want to know a good body shop beforehand, then writeit down and put it in your glove box so you'll have it at hand or put it on yourphone, because by law at least here in the United States you get in a wreck, youhave the right to pick wehatever body shop you want to fix your car, nobody canforce you to go to one place, but you have to understand, when the tow truckguys come, they generally get big kickbacks if they got a nice big wreckand they tow it to the body shop that they're affiliated with, they will getfive hundred a thousand maybe even more money for bringing that vehicle to thatbody shop, so you want to have one ready that you trust to say, no tow it here andif you don't know one, you still have the right to have it towed to your house, allthe insurance companies will tow it to your house then later they can tow it toa body shop, don't worry about that you just want to send it to a good job andnot just somebody who's being paid to ship your car off because they getkickbacks, so how do you find out if a body shop is a scam body shop or areally good one well you got to do a little researchhere, unless you live in Houston Texas then you can just ask me, who I use, I don'ttake any kickbacks I've sent many many customers to body shops and never took adime back from their repairs, I just want my customers to get their cars fixedcorrectly, I don't do bodywork so it's no skin off of my nose,and speaking of equipment you got to make sure that the body shop you pickhas a good paint booth, paint boots are giant areas that are completely sealed,so there's no dust they control the humidity for painting, it's veryimportant for getting body work done right, you don't want to have somebodypaint in your car that doesn't have a very good paint booth, try spray-paintingsomething outside, you're gonna see gets on it, hair everything, you got to have aplace that has a good paint booth and you have to have professional guysworking there who know how to blend paint and match it to the color of yourcar, because take a look at this, you can easily tell this bumper has been repaintedit's a completely different shade than the top of the car that wasn't painted, Imean look at that, you can see here's the one that's been repainted, it'scompletely a lighter color here it was not blended correctly, the paint doesn'teven match, so your visitor bodyshop say hey show me a car where youpainted part as a car, see if it matches and if it doesn't they're not any goodat blending paint, go someplace else and speaking of painting bumpers, check thisout this bumper was painted by a guy whodidn't even know what kind of paint to put on the car, realize that theseplastic bumpers are exactly that, they are plastic it requires a special kindof paint with a special bonding agent in order for it to stick, if you use regularcar paint that you put on the hood and put it on the bumper,guess what, it flakes off like this car did, whoever painted this bumper theyhad no notion about how to paint plastic bumpers, they shouldn't be in the bodybusiness and another big thing to check is the body shop area itself, if likethese cars all sitting all over the place they got tons of them looks likethey're busy, go back in a few weeks the same cars are sitting there, that's justa scam that guys use, I used to work for a guy like that years ago, he had all these junkcars and it would sucker people to come in and he wasn't fixing any of thosecars, you see all their stickers are out of date, some of them don't have licenseplates on them, don't go to a place like that cuz odds are, they're gonna takeforever to fix your car and may not even do a good job, because realize one thingbody shop work, it comes and it goes it's not a continuous thing, cars they breakdown all the time it's pretty continuous cars you're always breaking you got tofix them, but car wrecks they occur kind of randomly, so a lot of times these guysdon't have much business at all so if they're one of those guys thataren't that honest, they'll take your car in and say, oh it'll be ready in three days,another car comes in they're gonna make more money, they drop yours and then theyjust work on the car they're making more money, I've seen guys have cars and bodyshops for months for this reason, ask around, other people who theyuse and anybody who says that guy took forever to fix my car,don't go there, you find a guy like me I don't do bodywork, I do mechanical workbut my whole thing was, if people got here by 8:00 in the morning by 5:00 inthe afternoon most of the work I did on most of the cars were finished, I wantedto do stuff that we're in and out fast my customers were happy, they told peopleabout me, I never spent a nickel advertising because all my customerstold everyone about me, and of course you want a place that's been in business alot, but here's the kicker, you gotta do a little bit of research because I had aguy he was a great body man, but as he got older, he made a son take over theshop and his son had no interest in doing bodywork on cars really, so it'stime went on, I used the guy for a decade and a half, but then when a son took overI sent customers there they could bring the car over to me and I'd look at themand you could see scratches from the sandpaper that they didn't make smoothand paint it over so it had permanent scratches in it, you got to make surethat the person who's running to place cares about what his shop puts out andhere's where the Internet can really help you out a lot, because of peoplehave crappy bodywork done and it doesn't look right, they're gonna complain on theInternet, so if you do a research on the guy and you see, there's complaintsall over the place about this guy then you'd think, I'm not gonna go thereI'm gonna go somewhere else and although I'm always trying to save people moneyhere, don't go too cheap with bodywork you see those ads when I was a kid itused to be we'll paint any car for you know 59. 95 now it's like 200 or 300dollars, you're not gonna get a very good paint job of your car for that kind ofmoney these days, I had my old Celica done like five years ago at one ofthose places and you can see the paint's flat, it just doesn't hold up, to do agood paint job costs a lot of money to paint the entire car and speaking of agood shop a good shop handles all insuranceclaims, you don't do anything, if they say we want some money up front, you gosomeplace else, the good ones they all use insurance companies where they callit up, they handle all the paperwork if there's a problem they call up theinsurance company and say, look we just pulled off the bumper and found out thatthere's more damage underneath, then they can send a guy to look to make surethat's the truth, you don't have to get involved in the actual repair, and like anything you pretty much have to feel out the shop, as peoplein Texas have always said, you don't want a guy who's all hat and no cattle, or when Iwas younger in New York, hey you don't want the guy who's got the motorcyclejacket, but he doesn't have the motorcycle, there's plenty of good body shopsout there, you just have to find them, but since people are always getting in wrecks, heythat's your friends, see cars that were wrecks that they had fixed, look at it closelyand look at it in the Sun when the sun's shining, because the human eye we can seemillions of different varieties of colors, you can see hey wow that wasfixed really well or hey that doesn't match at all or there's paintthat's bubbled up or you look at the fender the guy replaced and parts ofthe gaps or half an inch and other parts are an inch and a half gap, you knowthat place does lousy work and don't go there and when you do find a good bodyshop hey, pass the word of mouth around go on the internet tell people, tell yourfriends about it, because if you find a good body shop, you tell other peopleabout it, they're going to continue to do good work, especially when they say, heyJoe sent me, they don't want Joe to get mad because if he's telling a bunch ofpeople how good they are and he does lousy work, they know they're gonnalose business and if they don't have to spend me advertising money like I neverspent, that's more money in their pocket and less money out of yours that's payingfor the body shop and the advertising, so take a tip for me and find a good bodyshop before you get in a wreck, because it's often too late then and you'll bestuck towed to some place where everybody's getting kickbacks fromeverybody else and the work is relatively shoddy,so if you never want to miss another one of my new car repair videos, remember toring that Bell!.