If you’re looking for an auto body shop in New Jersey make sure you give Peotters Tire & Auto a call as the New Jersey areas premier tire and brake shop. Today’s vehicles are made with many different types of fuel-saving materials like lightweight alloys and plastics. It is important for an auto body shop in New Jersey to be aware of the different materials and techniques used for repairing them.
Auto body shops like Peotter’s Tire and Auto and collision repair services refer to manuals for instructions repairing bumpers. The different material types require various finish materials, removal and installation procedures.
When a plastic bumper is cracked or has a small hole it can be repaired to look as good as new. Replacing the bumper is wasteful and it creates unnecessary debris for our landfills.
A good, eco-friendly auto body shop in New Jersey will only recommend replacing the bumper if the damage is severe enough that repair time would be considered unreasonable and quality of results would be unsatisfactory.
When you think of auto body shops, the first thing that pops into your mind is usually a place where you bring your car to after you an accident that needs some sort of collision or damage repair done; you might also think that an auto body shop is a place where you would bring your car to for some minor touch up work for various scratches or dents that have mysterious migrated onto your car. Thinking these things is by no stretch wrong but another thing that auto body shops perform is custom car modifications.The realm of things that can fall into the category of custom automotive work are endless. Everything ranging from body kits to mufflers and even paint jobs can be perform by your local body shop providing they have the proper supplies and equipment for the job. As with all things, some auto body shops have a better reputation then others when it comes to do custom work. A good thing to keep in mind is the workload of the garage you are planning on visiting on any given time. If the body shop you are trying to use is full of customers, they might very well be able to do the work but the turn around time would be long. If the reputation of the shop is good enough then it is worth the wait and going through the hassle of making other plans while your car is being worked on.After you have decided on the type of work you would like to have done to your car, you should specifically ask one of the auto body shops you have in mind if they can perform the job. If you have a fancy car that requires special tools of mechanical knowledge then it might be out of the realm of possibility for certain garages. It is also well worth it to research the auto body work shop you are planning on visiting in terms of any complaints filed against them before you bring your car in. The best way to do this is by looking on the Internet for reports filed against the shop you are interested in.Before any custom work is done to your vehicle you should ask upfront for a clear cut estimate and to be telephoned if any extra work needs to be performed that is vital to the success of the original job request. If you have found a good garage, they would not do any extra work without your prior consent or agreement.
The cost of repairing small abrasions, cracks and holes in plastic bumpers is often much cheaper than replacing the part.
Of course, many collision repair technicians would rather replace the part and charge a fee for their labor plus mark-up on the price of the part because they lack in cosmetic repair skills and it is easier to warranty the work.
Working with Plastics
The first step to repairing plastic bumpers is to identify the material in order to choose the method of repair. Auto body shops use ISO codes on the parts to identify the various families of plastics. They cross-reference the codes with charts from the suppliers or by accessing reference materials on the internet.
It is important that the collision repair technician determine the type of plastic they are working with so they know the proper welding procedure to use to avoid damage to the part.
Some plastics can be welded with an airless welder or hot-air welder; others require a hot glue type of procedure. Tests must be performed and welding procedures have to be done correctly to avoid adhesion failure. Some bumpers will melt with a slight color change and they will remain tacky in the area where they have melted.
The bumper repair technician must identify the type of plastic they are working with in order to be successful with adhesive repairs. Failure to properly identify the plastic results in adhesion-related problems.
Some repair materials are based on flexible and rigid plastics. Using the wrong material can cause cracking when the part is flexed or it may not provide the correct strength for the repair area.
Cleaning and Prep
Proper cleaning and prep is critical for proper adhesion and finish. Whether the technician is repairing or replacing the bumper, the part will need to be cleaned. The bumper being repaired is likely to be dirty from the road; the new replacement part can have contamination on it from the manufacturing process.
Auto body repair professionals should use a low-VOC surface cleaner or a special plastics parts cleaner to help prevent solvents from going too deep into the plastic. If solvents are too harsh, they go deep into the plastic and cause adhesion problems after repairs are done.
This is an overview of the process of working with plastics. Time is money in the auto body industry; therefore, many collision repair technicians choose to replace rather than repair plastic bumpers and other parts.
Technology allows us to repair many items that are often replaced. As resources become scarce and landfills become over-full, we really should consider repairing rather than replacing when possible.
Who Really IS the Best Auto Body Shop in New Jersey ?
People understandably get confused between wheel alignment and balancing. So what is wheel alignment? Wheel alignment is simply making sure that all four wheels are pointing in the right direction. During the course of your car's life it will have to make it over speed bumps, up and down curbs and across many pot holes! This can all affect the wheel alignment and if it is out by a few degrees it will cause uneven tyre wear. This means that your tyres are not correctly in contact with the road.Another issue that could occur is earlier and more frequent tyre changes than you would normally require, and annoyingly only a quarter of the tyre may even be worn. Four wheel alignment is usually carried out using laser technology. All four wheels have a laser fitted and a measuring board indicates the wheel alignment. If the wheel alignment is out it is then adjusted at this stage. The adjustments will be visible on by the laser showing the technician when to stop or exactly how much adjustment is required.Why is it important to have wheels balanced? When the tyres are fitted to the wheel they are not perfectly balanced. This means that if you had your new tyres fitted without the balancing in place you would experience a juddering sensation through the steering wheel. This can be uncomfortable and if the wheel balancing is a long way out the steering wheel will shake in your hands. This can obviously be quite dangerous and potentially lead to accidents! Therefore it is recommended that the wheels are balanced every time new car tyres are fitted.The wheel balancing is a process that is carried out by a machine. The tyre technician will fit the new tyre onto the wheel and then clamp it onto the machine. The balancing machine then spins the wheel around and then calculates the weight required to counterbalance where the wheel is out. The weight is then fitted to the exact spot on the wheel and is then rechecked to make sure the wheel is perfectly balanced. The weights are either stuck on or clamped onto the wheel. If the vehicle is fitted with alloy wheels then the weight will be stuck to the wheel. This avoids damaging the wheel. The stuck on weight is generally fitted to the inside of the wheel so the aesthetic appeal of the alloy wheel is not lost in the process.
Auto Glass and Body Shops
How many times have you been in this situation: You are owed money on a construction project and are thinking of filing a mechanic's lien. But you know that after filing it there will begin a serious dispute process, and probably involving the hiring of lawyers on each side. You would like to send a notice to the other side telling them that if it is not paid, more serious steps will be taken. Well, there is a form to be used in this situation. In my experience, this is a very popular form--so much so we would like to make it available to the construction industry.This form below warns the owner that you will be filing a mechanic's lien if payment is not made within ten days. Hopefully, it will create a serious dialogue for settlement. Come up with your bottom line amount to settle and be prepared to offer it to the owner if he or she is negotiating in good faith. Remember that the last thing an owner wants is a lien on their property: it jeopardizes title, interferes with their relationship with the construction lender, and prevents refinancing or sale. This Notice is worded in a non-threatening manner so as to capitalize on this situation, with the owner knowing that you are required by law to file a lien within a set period of time or lose your lien rights.WHO CAN USE THIS FORM? All persons, whether general contractor, subcontractor, or supplier.HOW TO SERVE: There is no need to file this with the court or record with the recorder's office. It is simply served by mailing.WHO TO SERVE: If you are a general contractor, serve the owner and construction lender. If you are a subcontractor or supplier, serve the owner, general, and construction lender.HOW TO SERVE: Although not required, it is recommended for its effectiveness to be served by certified mail.WHEN: Serve ten days before you file or record the mechanic's lien. Remember, it does not extend the time to file a mechanic's lien.NOTARIZED? No.COPIES: The original signed copies are served. Keep an extra copy for your records.CERTIFICATE OF MAILING. Use a standard Proof of Service form. Sign this Proof (it is like a certificate of mailing) and staple it to the form so you have proof it was mailed to the various persons or entities.MARGINS AND FONT. This is a Word document so use the following margins so it prints out properly: Top: 18 pt; Bottom: 22 pt; Left: 58 pt; Right: 58 pt. Type size is 12.HOW TO USE? Cut and paste the form into a new Word document.WHICH STATES?Use this notice only in the following states: Alabama, Alaska, Arizona, Florida, Idaho, Indiana, Iowa, Kansas, Louisiana, Maine, Massachusetts, Michigan, Minnesota, Mississippi, Montana, Nebraska, New Mexico, New York, North Carolina, Ohio, Oklahoma, Oregon, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, and West Virginia.As to California, you can use it until further notice. California is in the process of amending its mechanic's lien statutes which will require a specific notice. Check our web site for that new form.SAMPLE FORM STARTS HERENOTICE OF INTENTION TO FILE A MECHANIC'S LIEN (General) (This is not a Mechanic's Lien, nor a reflection on the credit of any contractor)__________________________________________________________________________________ Via Certified MailTO OWNER:_________________________________________________ (name(s))________________________________________________ (address--no. and street)________________________________________________ (address--city, state, zip)FROM GENERAL CONTRACTOR:_______________________________________________ (name(s))_______________________________________________ (address--no. and street)_______________________________________________ (address--city, state, zip)______________________________________________ (fax/phone)Please take notice that the undersigned lien claimant intends to file a Mechanic's Lien against your property if payment is not made for moneys owed as follows:PROJECT NAME: __________________________________________________________________________________PROPERTY SUBJECT TO LIEN (common street address or other description): __________________________________________________________________________________(1) General description of construction services furnished by Lien Claimant: _________________________________________________________________________________ _________________________________________________________________________________ ________________________________________________________________________________(2) Amount due: Through _________ (date) is $ _____________ after just credits (total performed, with extras of $ ___________ , less payments of $ ____________ ). Unpaid invoice(s) attached. Attorney's fees and court costs will also be requested.The above-described work was provided to your property, at your instance, by the Claimant. If payment is not made within ten days (10) of receipt of this demand, Claimant intends to file a Mechanic's Lien, without further notice. If you have any questions or wish to make payment arrangements, please call immediately to discuss.Dated: ____________________________________________________________ (Signature and Title)
- Brake Check in New Jersey
- Tire Repair in Summit
- Auto Body Shop in New Providence
- Tire Repair in Berkeley Heights
- Brake Check in Mountainside
- Brake Repair in Chatham
- Tire Repair in Madison
- Tire Repair in Springfield
- Brake Repair in Maplewood
- Brake Check in Vauxhall
- Best Auto Body Shop in Short Hills
- Brake Repair in Kenilworth
- Tire and Brakes in South Orange
- Tires and Brakes in Morristown
- Tire and Brakes in Florham Park
- Tire Repair in Livingston
- Auto Body Shop in Union