Best Auto Body Shop in New Jersey

If you’re looking for an auto body shop in New Jersey make sure you give Peotters Tire & Auto a call as the New Jersey areas premier tire and brake shop. Today’s vehicles are made with many different types of fuel-saving materials like lightweight alloys and plastics. It is important for an auto body shop in New Jersey to be aware of the different materials and techniques used for repairing them.

Auto body shops like Peotter’s Tire and Auto and collision repair services refer to manuals for instructions repairing bumpers. The different material types require various finish materials, removal and installation procedures.

Bumper Repairs

When a plastic bumper is cracked or has a small hole it can be repaired to look as good as new. Replacing the bumper is wasteful and it creates unnecessary debris for our landfills.

A good, eco-friendly auto body shop in New Jersey will only recommend replacing the bumper if the damage is severe enough that repair time would be considered unreasonable and quality of results would be unsatisfactory.

A car is a very complex piece of machinery. Each individual part is vigorously tested before it ever goes into production models and, like a chain, relies upon every other part in order for the vehicle to function. One poorly built aspect can cause serious malfunctions leading to costly repairs, or worse, an accident.

Even something as simple as the glues used to hold a tire tread to the rest of the tire is an integral part of a car or truck. Just ask Firestone. That exact issue resulted in a costly recall of thousands of tires, legal recourse, as well as over 500 injuries and 148 deaths. All of which could have been prevented with only a little bit of testing. Be wary of new designs rushed into mass production.

Often a seemingly superficial part to a vehicle actually provides a significant amount of safety. Everyone knows a windshield protects the driver and passenger from wind and debris. Most also know that they are also designed with a thin film that prevents them shattering upon impact. What most people don't know is that the windshield provides over half of the structural support for the car during an impact. The windshield combined with the frame of the car makes it structurally safer than a car without one. Cracks in a windshield can greatly reduce their protective power, as well as obstruct the driver's view which is even more dangerous.

Replacing or repairing cracks and chips in a windshield should be done by trained professional at a certified and insured auto glass or body shop. Avoid independent installers and people who operate only out of their truck. The adhesive used dries in about an hour, so if any body shops quote you a turn around time less than that, they are either lying or don't know what they are doing.

Also, it is a good idea to know a little bit about the glass windshields they will be installing. There are three aftermarket windshields that exceed OEM and DOT specs, they are P.P.G., L.O.F. and Plinkington.

Other suitable windshields are made by the car factory. Ford's factory glass is called Carlite, and Chrysler's is Safeguard. Expect to pay more money for factory glass. A good auto glass installer will sand all the rust around the windshield after it is removed, and then prime and paint it before installing the new windshield. It is best to go with body shops that have been around for at least five years as they are more likely to be around to guarantee warranties and make repairs in the future. Many shops will also work with your insurance carrier to get you the best price on a windshield, sometimes completely paid for by the insurance company.

Body repair is another story and can become very expensive. Newer cars with plastic and fiberglass bodies are almost impossible to repair, the body panels are often much easier to just replace, and that can be accomplished by almost anyone with a wrench and screw driver. Repairing dents and rust on metal bodies can be time consuming as well as expensive. It also requires a matching paint job which is similarly expensive. If the dented or rusted panels can be removed it makes it much easier. Dents can be pounded back into shape. In addition to this, it is often just easier to work on and paint a detached piece. Some work can be done by the average Joe, but extensive body work should be done at an established body shop.

The cost of repairing small abrasions, cracks and holes in plastic bumpers is often much cheaper than replacing the part.

Tire Company Near Me

Of course, many collision repair technicians would rather replace the part and charge a fee for their labor plus mark-up on the price of the part because they lack in cosmetic repair skills and it is easier to warranty the work.

Working with Plastics

The first step to repairing plastic bumpers is to identify the material in order to choose the method of repair. Auto body shops use ISO codes on the parts to identify the various families of plastics. They cross-reference the codes with charts from the suppliers or by accessing reference materials on the internet.

It is important that the collision repair technician determine the type of plastic they are working with so they know the proper welding procedure to use to avoid damage to the part.

Some plastics can be welded with an airless welder or hot-air welder; others require a hot glue type of procedure. Tests must be performed and welding procedures have to be done correctly to avoid adhesion failure. Some bumpers will melt with a slight color change and they will remain tacky in the area where they have melted.

Adhesive Repairs

The bumper repair technician must identify the type of plastic they are working with in order to be successful with adhesive repairs. Failure to properly identify the plastic results in adhesion-related problems.

Flexibility

Some repair materials are based on flexible and rigid plastics. Using the wrong material can cause cracking when the part is flexed or it may not provide the correct strength for the repair area.

Cleaning and Prep

Proper cleaning and prep is critical for proper adhesion and finish. Whether the technician is repairing or replacing the bumper, the part will need to be cleaned. The bumper being repaired is likely to be dirty from the road; the new replacement part can have contamination on it from the manufacturing process.

Auto body repair professionals should use a low-VOC surface cleaner or a special plastics parts cleaner to help prevent solvents from going too deep into the plastic. If solvents are too harsh, they go deep into the plastic and cause adhesion problems after repairs are done.

This is an overview of the process of working with plastics. Time is money in the auto body industry; therefore, many collision repair technicians choose to replace rather than repair plastic bumpers and other parts.

Technology allows us to repair many items that are often replaced. As resources become scarce and landfills become over-full, we really should consider repairing rather than replacing when possible.

Who Really IS the Best Auto Body Shop in New Jersey ?

The Tire Store

Without knowing what to look for, choosing a quality auto body shop is tough. It's important to select the right auto shop to ensure the vehicle is fixed correctly the first time. It's also the best way to make sure the shop is honest and reliable. There are many important features of a good shop, including an experienced staff and certifications. It can also help to read customer reviews before making a selection.A Certified ShopA good body shop is certified by the largest auto organization. Facilities that gain the approval of the organization have proven their abilities as certification is often a lengthy process. To become approved, an auto shop must demonstrate it has the latest equipment, qualified technicians and a proper facility. It must also show it offers above average training to its employees. Larger associations always collect feedback from prior customers as well before issuing an approval. Auto shops can also receive certification from parts manufacturers and organizations like Autobody Alliance, which requires the shop to meet certain qualifications.Qualified and Experienced StaffA good auto body shop has qualified staff with a number of certifications. Certification from ASE (Automotive Service Excellence) is especially important. ASE is a non-profit organization that offers certifications to automobile technicians that show proficiency in their trade. Technicians may also have certification from car manufacturers like GM, Chrysler, Toyota and Nissan, showing their knowledge and experience dealing with particular car brands. Some auto technicians also receive aftermarket training from Bendix, Moog, or NAPA. Most training requires a great deal of knowledge and experience and demonstrates a technician is a professional in their field.Positive Customer ReviewsWhen possible, former clients should be consulted about their experience with the shop. Some resources to find reviews are online, making it easy to decide if a body shop has good feedback from the public. Reviews should mention that the vehicle was fixed properly the first time and work was completed in a timely fashion. Positive reviews should also discuss whether a warranty was offered by the body shop and if the facility was clean and orderly. A facility that has the approval of a large automobile association has shown a history of positive feedback from customers, although it's always a good idea to check into a shop as much as possible.Accepts All InsuranceAnother important aspect of a good body shop is its acceptance of all forms on insurance. An auto body shop that accepts all insurance providers demonstrates it has experience working with insurance companies to settle claims quickly. A shop that is hesitant to accept major insurance providers is a red flag that something may be wrong. This is also a matter of convenience and makes it easier for the vehicle owner to select a shop they feel comfortable with.Selecting the right auto body shop requires a bit of patience and consideration. For example, choosing the first shop available can be a disaster if the employees aren't trained properly. A good auto shop is clean and up-to-date with a friendly and knowledgeable staff. The shop should have positive reviews and a range of certifications for both the facility and technicians. It should also accept all forms of insurance, making repairs easy and convenient.

Auto body (Collision Repair and Refinishing)

Tire City

Tire balancing and wheel alignment are some of the most common auto repair services offered by technicians. When you buy new car tires, you may consider performing a wheel alignment. Having an alignment done can save you a lot of costs in the long run.The Importance of Wheel AlignmentHaving a wheel alignment done will help to significantly increase the life of your new tires. During the wheel alignment, the steering and suspension of your vehicle is going to be adjusted in order to ensure that the tires don't wear out overtime. Alignment is also important because it ensures the car handles corners smoothly.Wheel alignment is needed overtime because as you drive, your car's steering and suspension systems are pushed causing the ball & socket joints, bushings and other mechanical links to wear out. This makes the alignment deflect from the factory specifications. If nothing is done to improve the alignment, your car will have poor cornering and handling which also makes the tires wear out.Tire imbalance can occur when the rubber that is used in making it wears off overtime. That is why it is important to check your tires for imbalance every 6 months and ensure they are rebalanced. Tire imbalance can cause severe accidents especially when the car is driven at fast speeds.Tire balancing and wheel alignment can be done together. These services will help you to avoid budgeting for new tires soon. Even though they can be pretty expensive, they'll prevent serious accidents and increase the service life of your car. Just ensure you visit a well known auto repair shop and find a technician who is skilled and equipped to offer these services.Copyright (c) 2014 Crawfordville Auto and Tire


Brake Check in New Jersey

It happens to all of us at one point in time. We get into an automobile collision and need the best auto body shop in New Jersey. Hopefully, it is not too bad and we are not seriously injured. But usually the car does not fare as well and comes away with significant damage.

What is the next step after your collision and you need an auto body shop?

Likely, after informing the insurance company you take your vehicle to one of their “approved” vendors.

Here is what happens next. You tell the insurance company what company you choose. By this time they have already taken phones of the car and know how extensive the damage is. If you need an expert to take a look, make sure you go to a repair shop in New Jersey. 

They have a computer system that gives them a printed estimate stating what the replacement parts and labor will be based upon a set hourly rate.

This statement is given to the body shop. It comes with a break down of what the labor and parts “should” be and the company has to usually be able to totally fix the car for that price.

Wheel Alignment and Tire Balancing: Why Are They Important?

Keep in mind that what is printed out represents the best case scenario and doesn’t allow for items on the car that was missed or problems that come up.

Now here are some things to watch out for. a local auto body shop in New Jersey is operating under very, very thin margins and the incentive to “cut corners” is huge. Getting an extra $300 off a job can really add up over the course of the month when you are talking about doing at least 3-5 vehicles every week.

How to Pick the Right Auto Body Repair Shops

Replacement Parts in Auto Body Shops

Make sure the parts being used on your car are OEM parts. These are replacement auto body parts in New Jersey are sent directly from the car manufacturers and are designed with the same specs as the vehicle came with.

Used Tires Wholesale

Aftermarket parts can be significantly cheaper yet are not the same quality and make not hold up the same in the event of another accident.

No Realignment? Talk to Your Auto Repair Team!

The frame is usually somewhat bent when a car goes through an accident of any kind. It needs to be properly realigned. You need a serious all hands on deck auto body shop to take care of you here.

Unfortunately, because the money made off one car can be very little the propensity to skip this step is very high. Later down the road this will cause your car to not drive straight but at a tilt and your tires will wear prematurely. So if you need to brush up on some tire repair, ask your mechanic straight away.

Using Bondo (Fillers) Instead of Replacing the Part

Filling any damage in with bondo is not bad in itself. If you know what the auto body shop in New Jersey is doing, they tell you, and this is what you are paying for then it is fine.

The problem comes in when you think you are getting a vehicle back that is 99.9% the same as before it was wrecked and it is not. Filling a damaged part in with filler rather than replacing the expensive part is a common tactic and you want to make sure it is not done on your vehicle.

Body shops say insurance companies are skimping on repairs

All damaged parts should be replaced unless you are paying a lower price for the car to just be fixed (in the case you want the cheapest price and do not care about having a car exactly the same as before). Again, you should really speak to your best auto body shop nearest you!

Keep in mind that most auto body repair shops are honest and are surviving in a tough industry.

Jeff what are the three questions should ask a body shop before they consider dropping their car off for repairs? Well what's important is that the repair shop actually be qualified to fix that particular vehicle.

Today modern cars require specialized training and equipment to be able to perform repairs to the manufacturer's standards.

For instance, this Mini Cooper and other BMWs require what's called rivet bonding.

So, glue joints and rivets.

They're actually repaired like aircraft today.

This is important because this maintains the structural integrity the manufacturer designed for a repair situation.

Like this fixture frame bench here that utilizes actual jigs to support the vehicle across its entire platform and place factory components precisely where the manufacturer has designated.

These systems are different than generic systems that simply are reverse engineered and don't have jig and holding capacity.

Shops that aren't trained and equipped to properly perform a repair utilizing generic equipment or generic procedures can't restore the vehicle to the manufacturer's standards and that doesn't necessarily maintain the safety ratingdesigned for the vehicle.

You potentially jeopardize the collision energy management system.

The vehicle might not perform the same in a future collision and you could possibly be more injured than you would if the car doesn't perform as the manufacturer intended.

The second question a consumer should ask is "Where does the body shop's loyalty lie?" Is it an independent repair center that relies on satisfied customers to drive business through their door and therefore fixes vehicles correctly? Or is the body shop on the insurance company's "preferred network?" Those body shops rely on the insurance referrals and when those body shops utilize cheap, imitation, and savage parts utilize the quickest possible repair times and keep costs as low as possible that generates the next referral.

But that's a recipe for shortcuts.

The third question, Paul, is "Can the repair shop make this process convenient for me?" Most consumers today want convenience and ease.

Repair shops that are high-quality repair shops are going to put their customers' interests first & do everything they can to have a satisfied customer.

That includes sheduling a rental car, scheduling a tow engaging in conversations with the insurance company and making sure the vehicle is fixed right for the consumer.

Auto Body Shops - Few Tips For Dealing With Them

The insurance companies nickel and dime them at every turn and they are made to give them at time ridiculous discounts to get any business. That’s why having an auto body shop in your corner can’t be stressed enough.

Nevertheless, all an auto body shop should be on is your side and corners should not be cut at your expense and being watchful is just a smart way to go.

Your Auto Body Shop In New Jersey Should Help You With What Car Needs Exactly?

Uniroyal Tires

People understandably get confused between wheel alignment and balancing. So what is wheel alignment? Wheel alignment is simply making sure that all four wheels are pointing in the right direction. During the course of your car's life it will have to make it over speed bumps, up and down curbs and across many pot holes! This can all affect the wheel alignment and if it is out by a few degrees it will cause uneven tyre wear. This means that your tyres are not correctly in contact with the road.Another issue that could occur is earlier and more frequent tyre changes than you would normally require, and annoyingly only a quarter of the tyre may even be worn. Four wheel alignment is usually carried out using laser technology. All four wheels have a laser fitted and a measuring board indicates the wheel alignment. If the wheel alignment is out it is then adjusted at this stage. The adjustments will be visible on by the laser showing the technician when to stop or exactly how much adjustment is required.Why is it important to have wheels balanced? When the tyres are fitted to the wheel they are not perfectly balanced. This means that if you had your new tyres fitted without the balancing in place you would experience a juddering sensation through the steering wheel. This can be uncomfortable and if the wheel balancing is a long way out the steering wheel will shake in your hands. This can obviously be quite dangerous and potentially lead to accidents! Therefore it is recommended that the wheels are balanced every time new car tyres are fitted.The wheel balancing is a process that is carried out by a machine. The tyre technician will fit the new tyre onto the wheel and then clamp it onto the machine. The balancing machine then spins the wheel around and then calculates the weight required to counterbalance where the wheel is out. The weight is then fitted to the exact spot on the wheel and is then rechecked to make sure the wheel is perfectly balanced. The weights are either stuck on or clamped onto the wheel. If the vehicle is fitted with alloy wheels then the weight will be stuck to the wheel. This avoids damaging the wheel. The stuck on weight is generally fitted to the inside of the wheel so the aesthetic appeal of the alloy wheel is not lost in the process.

Laser Wheel Alignment: Chassis Mounted Vs Wheel Mounted


Best Auto Body Shop in New Jersey