It happens to all of us at one point in time. We get into an automobile collision and need the best auto body shop in Livingston. Hopefully, it is not too bad and we are not seriously injured. But usually the car does not fare as well and comes away with significant damage.
What is the next step after your collision and you need an auto body shop?
Likely, after informing the insurance company you take your vehicle to one of their “approved” vendors.
Here is what happens next. You tell the insurance company what company you choose. By this time they have already taken phones of the car and know how extensive the damage is. If you need an expert to take a look, make sure you go to a repair shop in Livingston.
They have a computer system that gives them a printed estimate stating what the replacement parts and labor will be based upon a set hourly rate.
This statement is given to the body shop. It comes with a break down of what the labor and parts “should” be and the company has to usually be able to totally fix the car for that price.
What to Look for in an Auto Body Shop
Keep in mind that what is printed out represents the best case scenario and doesn’t allow for items on the car that was missed or problems that come up.
Now here are some things to watch out for. a local auto body shop in Livingston is operating under very, very thin margins and the incentive to “cut corners” is huge. Getting an extra $300 off a job can really add up over the course of the month when you are talking about doing at least 3-5 vehicles every week.
The Importance of Proper Wheel Alignment
Replacement Parts in Auto Body Shops
Make sure the parts being used on your car are OEM parts. These are replacement auto body parts in Livingston are sent directly from the car manufacturers and are designed with the same specs as the vehicle came with.
Aftermarket parts can be significantly cheaper yet are not the same quality and make not hold up the same in the event of another accident.
No Realignment? Talk to Your Auto Repair Team!
The frame is usually somewhat bent when a car goes through an accident of any kind. It needs to be properly realigned. You need a serious all hands on deck auto body shop to take care of you here.
Unfortunately, because the money made off one car can be very little the propensity to skip this step is very high. Later down the road this will cause your car to not drive straight but at a tilt and your tires will wear prematurely. So if you need to brush up on some tire repair, ask your mechanic straight away.
Using Bondo (Fillers) Instead of Replacing the Part
Filling any damage in with bondo is not bad in itself. If you know what the auto body shop in Livingston is doing, they tell you, and this is what you are paying for then it is fine.
The problem comes in when you think you are getting a vehicle back that is 99.9% the same as before it was wrecked and it is not. Filling a damaged part in with filler rather than replacing the expensive part is a common tactic and you want to make sure it is not done on your vehicle.
How to Heat an Auto Body Shop
All damaged parts should be replaced unless you are paying a lower price for the car to just be fixed (in the case you want the cheapest price and do not care about having a car exactly the same as before). Again, you should really speak to your best auto body shop nearest you!
Keep in mind that most auto body repair shops are honest and are surviving in a tough industry.
How many times have you been in this situation: You are owed money on a construction project and are thinking of filing a mechanic's lien. But you know that after filing it there will begin a serious dispute process, and probably involving the hiring of lawyers on each side. You would like to send a notice to the other side telling them that if it is not paid, more serious steps will be taken. Well, there is a form to be used in this situation. In my experience, this is a very popular form--so much so we would like to make it available to the construction industry.This form below warns the owner that you will be filing a mechanic's lien if payment is not made within ten days. Hopefully, it will create a serious dialogue for settlement. Come up with your bottom line amount to settle and be prepared to offer it to the owner if he or she is negotiating in good faith. Remember that the last thing an owner wants is a lien on their property: it jeopardizes title, interferes with their relationship with the construction lender, and prevents refinancing or sale. This Notice is worded in a non-threatening manner so as to capitalize on this situation, with the owner knowing that you are required by law to file a lien within a set period of time or lose your lien rights.WHO CAN USE THIS FORM? All persons, whether general contractor, subcontractor, or supplier.HOW TO SERVE: There is no need to file this with the court or record with the recorder's office. It is simply served by mailing.WHO TO SERVE: If you are a general contractor, serve the owner and construction lender. If you are a subcontractor or supplier, serve the owner, general, and construction lender.HOW TO SERVE: Although not required, it is recommended for its effectiveness to be served by certified mail.WHEN: Serve ten days before you file or record the mechanic's lien. Remember, it does not extend the time to file a mechanic's lien.NOTARIZED? No.COPIES: The original signed copies are served. Keep an extra copy for your records.CERTIFICATE OF MAILING. Use a standard Proof of Service form. Sign this Proof (it is like a certificate of mailing) and staple it to the form so you have proof it was mailed to the various persons or entities.MARGINS AND FONT. This is a Word document so use the following margins so it prints out properly: Top: 18 pt; Bottom: 22 pt; Left: 58 pt; Right: 58 pt. Type size is 12.HOW TO USE? Cut and paste the form into a new Word document.WHICH STATES?Use this notice only in the following states: Alabama, Alaska, Arizona, Florida, Idaho, Indiana, Iowa, Kansas, Louisiana, Maine, Massachusetts, Michigan, Minnesota, Mississippi, Montana, Nebraska, New Mexico, New York, North Carolina, Ohio, Oklahoma, Oregon, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, and West Virginia.As to California, you can use it until further notice. California is in the process of amending its mechanic's lien statutes which will require a specific notice. Check our web site for that new form.SAMPLE FORM STARTS HERENOTICE OF INTENTION TO FILE A MECHANIC'S LIEN (General) (This is not a Mechanic's Lien, nor a reflection on the credit of any contractor)__________________________________________________________________________________ Via Certified MailTO OWNER:_________________________________________________ (name(s))________________________________________________ (address--no. and street)________________________________________________ (address--city, state, zip)FROM GENERAL CONTRACTOR:_______________________________________________ (name(s))_______________________________________________ (address--no. and street)_______________________________________________ (address--city, state, zip)______________________________________________ (fax/phone)Please take notice that the undersigned lien claimant intends to file a Mechanic's Lien against your property if payment is not made for moneys owed as follows:PROJECT NAME: __________________________________________________________________________________PROPERTY SUBJECT TO LIEN (common street address or other description): __________________________________________________________________________________(1) General description of construction services furnished by Lien Claimant: _________________________________________________________________________________ _________________________________________________________________________________ ________________________________________________________________________________(2) Amount due: Through _________ (date) is $ _____________ after just credits (total performed, with extras of $ ___________ , less payments of $ ____________ ). Unpaid invoice(s) attached. Attorney's fees and court costs will also be requested.The above-described work was provided to your property, at your instance, by the Claimant. If payment is not made within ten days (10) of receipt of this demand, Claimant intends to file a Mechanic's Lien, without further notice. If you have any questions or wish to make payment arrangements, please call immediately to discuss.Dated: ____________________________________________________________ (Signature and Title)
Auto Body Shops and Custom Work
The insurance companies nickel and dime them at every turn and they are made to give them at time ridiculous discounts to get any business. That’s why having an auto body shop in your corner can’t be stressed enough.
Nevertheless, all an auto body shop should be on is your side and corners should not be cut at your expense and being watchful is just a smart way to go.
Your Auto Body Shop In Livingston Should Help You With What Car Needs Exactly?
When you think of auto body shops, the first thing that pops into your mind is usually a place where you bring your car to after you an accident that needs some sort of collision or damage repair done; you might also think that an auto body shop is a place where you would bring your car to for some minor touch up work for various scratches or dents that have mysterious migrated onto your car. Thinking these things is by no stretch wrong but another thing that auto body shops perform is custom car modifications.The realm of things that can fall into the category of custom automotive work are endless. Everything ranging from body kits to mufflers and even paint jobs can be perform by your local body shop providing they have the proper supplies and equipment for the job. As with all things, some auto body shops have a better reputation then others when it comes to do custom work. A good thing to keep in mind is the workload of the garage you are planning on visiting on any given time. If the body shop you are trying to use is full of customers, they might very well be able to do the work but the turn around time would be long. If the reputation of the shop is good enough then it is worth the wait and going through the hassle of making other plans while your car is being worked on.After you have decided on the type of work you would like to have done to your car, you should specifically ask one of the auto body shops you have in mind if they can perform the job. If you have a fancy car that requires special tools of mechanical knowledge then it might be out of the realm of possibility for certain garages. It is also well worth it to research the auto body work shop you are planning on visiting in terms of any complaints filed against them before you bring your car in. The best way to do this is by looking on the Internet for reports filed against the shop you are interested in.Before any custom work is done to your vehicle you should ask upfront for a clear cut estimate and to be telephoned if any extra work needs to be performed that is vital to the success of the original job request. If you have found a good garage, they would not do any extra work without your prior consent or agreement.