If you’re looking for an auto body shop in New Jersey make sure you give Peotters Tire & Auto a call as the New Jersey areas premier tire and brake shop. Today’s vehicles are made with many different types of fuel-saving materials like lightweight alloys and plastics. It is important for an auto body shop in New Jersey to be aware of the different materials and techniques used for repairing them.
Auto body shops like Peotter’s Tire and Auto and collision repair services refer to manuals for instructions repairing bumpers. The different material types require various finish materials, removal and installation procedures.
When a plastic bumper is cracked or has a small hole it can be repaired to look as good as new. Replacing the bumper is wasteful and it creates unnecessary debris for our landfills.
A good, eco-friendly auto body shop in New Jersey will only recommend replacing the bumper if the damage is severe enough that repair time would be considered unreasonable and quality of results would be unsatisfactory.
Check your tire pressures before deciding whether you need wheel alignment. Opposing tires that do not have balanced tire pressure can indicate the unnecessary need for wheel alignment. Wheel alignment is the science of aligning the rear wheels to run in the same tracks as the front wheels. Correctly aligned wheels can improve the mileage tires will last by up to 10 000 kms.I was driving from Durban to Nelspruit eying the craters euphemistically referred to as potholes. I am sure I saw a Landrover fall into the one, but on closer inspection could not find any positive proof barring what looked like the tracks of some Continental tires. The bottom was not visible so we remain unsure of whether there were any survivors. Back to my point, beside the fact, that not all of us drive rugged 4x4 vehicles. Believe me, they also need realignment after a trip on those Mpumalanga roads. I got to wondering about how often it should be done. I spoke to Gary at HI-Q on my return to Nelspruit who said "It's a good idea to check your alignment every 10 - 12000 kms"If your camber or toe in are out you can wear a tire down to canvass in as little as 3000 km's. I did that once back when I hit a kerb with my Mazda tree to tree in the eighties. In essence, Gary just reinforced what I already knew. Pop into HI-Q down in Riverside Industrial Park right opposite Volvo and Land Rover on the way to the mall. Gary and his team will freely advise you if their services are essential.
The cost of repairing small abrasions, cracks and holes in plastic bumpers is often much cheaper than replacing the part.
Of course, many collision repair technicians would rather replace the part and charge a fee for their labor plus mark-up on the price of the part because they lack in cosmetic repair skills and it is easier to warranty the work.
Working with Plastics
The first step to repairing plastic bumpers is to identify the material in order to choose the method of repair. Auto body shops use ISO codes on the parts to identify the various families of plastics. They cross-reference the codes with charts from the suppliers or by accessing reference materials on the internet.
It is important that the collision repair technician determine the type of plastic they are working with so they know the proper welding procedure to use to avoid damage to the part.
Some plastics can be welded with an airless welder or hot-air welder; others require a hot glue type of procedure. Tests must be performed and welding procedures have to be done correctly to avoid adhesion failure. Some bumpers will melt with a slight color change and they will remain tacky in the area where they have melted.
The bumper repair technician must identify the type of plastic they are working with in order to be successful with adhesive repairs. Failure to properly identify the plastic results in adhesion-related problems.
Some repair materials are based on flexible and rigid plastics. Using the wrong material can cause cracking when the part is flexed or it may not provide the correct strength for the repair area.
Cleaning and Prep
Proper cleaning and prep is critical for proper adhesion and finish. Whether the technician is repairing or replacing the bumper, the part will need to be cleaned. The bumper being repaired is likely to be dirty from the road; the new replacement part can have contamination on it from the manufacturing process.
Auto body repair professionals should use a low-VOC surface cleaner or a special plastics parts cleaner to help prevent solvents from going too deep into the plastic. If solvents are too harsh, they go deep into the plastic and cause adhesion problems after repairs are done.
This is an overview of the process of working with plastics. Time is money in the auto body industry; therefore, many collision repair technicians choose to replace rather than repair plastic bumpers and other parts.
Technology allows us to repair many items that are often replaced. As resources become scarce and landfills become over-full, we really should consider repairing rather than replacing when possible.
Who Really IS the Best Auto Body Shop in New Jersey ?
Regular wheel alignments are an important part of conscientious car maintenance. Unfortunately, many car owners fail to understand the importance of good wheel alignment, and therefore don't have their alignment checked often enough.Here are five reasons why getting regular wheel alignments is good for your car, your bank account, and your peace of mind.1: Better gas mileage. When your wheels are aligned properly, it cuts down on rolling resistance, which means that you car doesn't have to work as hard or burn as much fuel in order to move forward. This is good news for everyone: Not only do you spend less money on gas, but you also get the satisfaction of knowing your car is responsible for less pollution.5: Easier to drive. One of the biggest advantages of having your wheels aligned properly is that your car is easier to drive. No annoying pull to one side or the other. It's much easier and more pleasant to drive a car that has had regular wheel alignments.As you can see, there are many reasons why a car owner should be sure to get regular wheel alignments. Not only does having your wheels aligned properly save you money on gas, tires, and other potential repairs, but it also gives you better peace of mind to know that your car is being cared for properly.
What Is An Auto Body Shop?
It takes only a small misalignment to create problems with your vehicle, which is why proper wheel alignment is important. Simply put, all of components that make your vehicle go straight are called alignment. Misalignment can be caused by many factors including merely driving your vehicle. Potholes can be common culprits. A sizable pothole can bump your suspension out of the precisely calculated set of measurements that dictate proper wheel alignment.Why is wheel alignment important?Improper wheel alignment can effect driving performance as well as cost you money. Total alignment sets all four wheels positioned straight ahead and parallel. The following are benefits of wheel alignment:o Improves gas mileage. In the recent economy and a year of outrageous gas prices, everyone is looking to better their gas mileage to save money. By having your vehicle aligned properly, it decreases any resistance while rolling which increases your gas mileage. It is also important to make sure that your tires are properly inflated as this will help gas mileage as well.Yearly maintenance is recommended.Regular vehicle maintenance is recommended for optimal operation of your vehicle and its safety. It is important that you follow the vehicle manufacturer's recommendations listed in your owner's manual, however as a general rule your wheel alignment and tire check up should be scheduled every 10,000 miles or at least once per year.Often a suspension system inspection can be included as a part of this regular maintenance. This inspection can allow your ASE Certified Technician to spot potential problems or worn parts now before they become costly problems later.
- Brake Check in New Jersey
- Tire Repair in Summit
- Auto Body Shop in New Providence
- Tire Repair in Berkeley Heights
- Brake Check in Mountainside
- Brake Repair in Chatham
- Tire Repair in Madison
- Tire Repair in Springfield
- Brake Repair in Maplewood
- Brake Check in Vauxhall
- Best Auto Body Shop in Short Hills
- Brake Repair in Kenilworth
- Tire and Brakes in South Orange
- Tires and Brakes in Morristown
- Tire and Brakes in Florham Park
- Tire Repair in Livingston
- Auto Body Shop in Union