If you’re looking for an auto body shop in New Jersey make sure you give Peotters Tire & Auto a call as the New Jersey areas premier tire and brake shop. Today’s vehicles are made with many different types of fuel-saving materials like lightweight alloys and plastics. It is important for an auto body shop in New Jersey to be aware of the different materials and techniques used for repairing them.
Auto body shops like Peotter’s Tire and Auto and collision repair services refer to manuals for instructions repairing bumpers. The different material types require various finish materials, removal and installation procedures.
When a plastic bumper is cracked or has a small hole it can be repaired to look as good as new. Replacing the bumper is wasteful and it creates unnecessary debris for our landfills.
A good, eco-friendly auto body shop in New Jersey will only recommend replacing the bumper if the damage is severe enough that repair time would be considered unreasonable and quality of results would be unsatisfactory.
It happens to all of us at one point in time. We get into an automobile collision. Hopefully, it is not too bad and we are not seriously injured. But usually the car does not fare as well and comes away with significant damage.
What is the next step? Likely, after informing the insurance company you take your vehicle to one of their "approved" vendors.
Here is what happens next. You tell the insurance company what company you choose. By this time they have already taken phones of the car and know how extensive the damage is. They have a computer system that gives them a printed estimate stating what the replacement parts and labor will be based upon a set hourly rate.
This statement is given to the body shop. It comes with a break down of what the labor and parts "should" be and the company has to usually be able to totally fix the car for that price. Keep in mind that what is printed out represents the best case scenario and doesn't allow for items on the car that was missed or problems that come up.
Now here are some things to watch out for. Local body shops are operating under very, very thin margins and the incentive to "cut corners" is huge. Getting an extra $300 off a job can really add up over the course of the month when you are talking about doing at least 3-5 vehicles every week.
Make sure the parts being used on your car are OEM parts. These are replacement auto body parts are sent directly from the car manufacturers and are designed with the same specs as the vehicle came with. Aftermarket parts can be significantly cheaper yet are not the same quality and make not hold up the same in the event of another accident.
The frame is usually somewhat bent when a car goes through an accident of any kind. It needs to be properly realigned. Unfortunately, because the money made off one car can be very little the propensity to skip this step is very high. Later down the road this will cause your car to not drive straight but at a tilt and your tires will wear prematurely.
Using Bondo (Fillers) Instead of Replacing the Part
Filling any damage in with bondo is not bad in itself. If you know what they are doing, they tell you, and this is what you are paying for then it is fine. The problem comes in when you think you are getting a vehicle back that is 99.9% the same as before it was wrecked and it is not. Filling a damaged part in with filler rather than replacing the expensive part is a common tactic and you want to make sure it is not done on your vehicle. All damaged parts should be replaced unless you are paying a lower price for the car to just be fixed (in the case you want the cheapest price and do not care about having a car exactly the same as before).
Keep in mind that most auto body repair shops are honest and are surviving in a tough industry. The insurance companies nickel and dime them at every turn and they are made to give them at time ridiculous discounts to get any business. Nevertheless, corners should not be cut at your expense and being watchful is just a smart way to go.
The cost of repairing small abrasions, cracks and holes in plastic bumpers is often much cheaper than replacing the part.
Of course, many collision repair technicians would rather replace the part and charge a fee for their labor plus mark-up on the price of the part because they lack in cosmetic repair skills and it is easier to warranty the work.
Working with Plastics
The first step to repairing plastic bumpers is to identify the material in order to choose the method of repair. Auto body shops use ISO codes on the parts to identify the various families of plastics. They cross-reference the codes with charts from the suppliers or by accessing reference materials on the internet.
It is important that the collision repair technician determine the type of plastic they are working with so they know the proper welding procedure to use to avoid damage to the part.
Some plastics can be welded with an airless welder or hot-air welder; others require a hot glue type of procedure. Tests must be performed and welding procedures have to be done correctly to avoid adhesion failure. Some bumpers will melt with a slight color change and they will remain tacky in the area where they have melted.
The bumper repair technician must identify the type of plastic they are working with in order to be successful with adhesive repairs. Failure to properly identify the plastic results in adhesion-related problems.
Some repair materials are based on flexible and rigid plastics. Using the wrong material can cause cracking when the part is flexed or it may not provide the correct strength for the repair area.
Cleaning and Prep
Proper cleaning and prep is critical for proper adhesion and finish. Whether the technician is repairing or replacing the bumper, the part will need to be cleaned. The bumper being repaired is likely to be dirty from the road; the new replacement part can have contamination on it from the manufacturing process.
Auto body repair professionals should use a low-VOC surface cleaner or a special plastics parts cleaner to help prevent solvents from going too deep into the plastic. If solvents are too harsh, they go deep into the plastic and cause adhesion problems after repairs are done.
This is an overview of the process of working with plastics. Time is money in the auto body industry; therefore, many collision repair technicians choose to replace rather than repair plastic bumpers and other parts.
Technology allows us to repair many items that are often replaced. As resources become scarce and landfills become over-full, we really should consider repairing rather than replacing when possible.
Who Really IS the Best Auto Body Shop in New Jersey ?
Before you try to run out and find auto body shops near you, take a moment to read through this article and consider including some of my personal experience as a mechanic into your own personal deliberation about what constitutes the best auto body shops in business. When you break things down, there are really two types of garages in business: good ones and bad ones. The best place to start when trying to scope out a potential body shop is the owner. In bad auto body garages the owner usually instructs the employees to give the impression that your car is in worse shape then you think, or that something is broken and needs to be fixed right away. In a legitimate auto body garage, the owner is more concerned with forging a long standing relationship with you and getting your repeat business rather then just ripping you off and potentially never seeing you again.
The reason why most owners are concerned with ripping people off, especially in a body shop, is because the only two reasons cars ever go in there is for repairs on collision damage or for custom work; this means that the owners of the shop realistically do not see the owners of vehicles too often and do not see the value in repeat business, they would rather try to squeeze every dime out of your while you are there.
The best auto and body shop you can ever find is where the owner looks to develop long term relationships with their clients. While it is true they can potentially never see a newer customer again, these owners are smart and do the best work possible not only to help you out, but to impress you and have you refer your friends and family to him or her. These owners are less interesting in gouging your wallet and more interested in establishing a reputation in their local community for outstanding work and service. These types of people see the value in what it means to be a true professional and are more successful then their more selfish friends in the business.
The best way you figure out which owners are the good or bad guys is either by your own direct experience or the experience of others. You should not be afraid to talk to the auto body shop manager directly and begin to get a feeling for what he is about. After a short conversation and carefully studying his body movement and language, the first impression you get is often the right one.
Auto Glass and Body Shops
Wheel alignment or 'tracking' is an essential aspect of vehicle maintenance. Often done when you are having your tyres replaced, wheel alignment readjusts the angles of your car's wheels according to the manufacturer's specifications.The benefits of wheel alignment include: Reduces tyre wear and therefore increases the life of your tyres Keeps your vehicle running straight and true (rather than 'pulling' to one side) Improved handling Increased fuel efficiency Improves your driving safety A smoother ride All four of your wheels need to be aligned for your car to run correctly. If only the fronts are adjusted (sometimes known as a two-wheel alignment or 'toe and go') and your rear wheels are still out of alignment, you may still experience pulling, excessive or uneven tyre wear and a crooked steering wheel.Why not book a wheel alignment when you next buy replacement tyres? You can find great deals by searching for cheap tyres online, and even have a mobile fitting van come out to you rather than take time out of your schedule to visit a garage.Wheel alignment can seriously affect the quality of your ride, the efficiency of your handling, the precision of your steering and can lead to 'pulling' which makes your vehicle veer to one side while attempting to drive straight. All these things can become dangerous over time, so ensure that your car is maintained and in top condition for your own safety.
- Brake Check in New Jersey
- Tire Repair in Summit
- Auto Body Shop in New Providence
- Tire Repair in Berkeley Heights
- Brake Check in Mountainside
- Brake Repair in Chatham
- Tire Repair in Madison
- Tire Repair in Springfield
- Brake Repair in Maplewood
- Brake Check in Vauxhall
- Best Auto Body Shop in Short Hills
- Brake Repair in Kenilworth
- Tire and Brakes in South Orange
- Tires and Brakes in Morristown
- Tire and Brakes in Florham Park
- Tire Repair in Livingston
- Auto Body Shop in Union